© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Sorry for the obvious and if you have checked already, but I think the head lights have to be on dipped beam for these to work (when you spray...
Thanks Curt, will do and fingers crossed etc Cheers Ian
Interesting thread chaps - wonder if I could ask a similar query on this. My manual 2001 euro coupe has just started the classic "thrust bearing...
Good spot Curt - LHDs "over the pond" here aren't in great demand, although our "Brexit" preparations :):) are putting quite a few back in Europe...
Thanks Eric for a very quick reply and that its normal Cheers Ian
Guys - apologies for such a bad photo but it is of the Oil Pressure Transmitter mounted just below the oil filter on my 3 pedal 360 coupe. My...
I haven't had this problem (yet) but, as I don't use it much, I just keep it locked, which could help you in the short term. Cheers Ian
All good points Steve + my dealer told me that Trackers use a lot of current as well - I always use the Tender :) cheers ian
All i've done is put two felt tip marks on the drivers side wall of the garage at the height of the wing mirror - the first one is what I must let...
From across the pond, I cant remember who from, but circa £17.000 for a spider roof remove and replace with new is a scary poss....
My 360 (Euro) has an unvalved Larini from previous owner - he did some vids on you tube - type in "360 Larini 04" and you should get to them. I...
Brilliant article Dan, well done - I'll have to get ready to do mine soon then as your car has done 1 mile less than mine :):) thanks again Ian
+1 I had a weird, bearing type noise at front of engine when my 360 was at full temp and at tickover only. Had my indie check it out and,...
oops, thanks very much Alan, very clear explanation - understood cheers ian
Guys, I have spent sometime searching the forum and reading the WSMs and am having trouble with the actual access and TYPE of gearbox mesh on my...
Hi Dan, Yes, my Euro (RHD) only has "one touch" up and down on drivers side - bit annoying if I want to hear those "exhaust tunes" with both...
John, Mine is a non valved Larini - gives great (pre 2014) F1 "howl" at 3500 rpm and above. I have read somewhere if you want louder (and full...
Thanks Dan, Will do - funny thing, here in London, I use heating more than AC + I usually have both windows down just to listen to the "exhaust...
Thanks for all responses guys, Alan - I agree with your thoughts - to finally get rid of my paranoia :), I might listen for the AC compressor to...
Apologies chaps, boring question, but I find both my heater and the Air Con work better (ie react to temperature adjustments between hot and cold...