© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Every time I've suspected my valve wasn't opening, it wasn't. Usually just a small thing and easily fixed - like a crack in the vacuum hose to the...
What year is the car? the Teves and Bosch are very different systems with different failure modes. Initial symptoms do sound like classic...
Pricing aside, that's a very pretty F355!
I know it sounds crazy, but soak it in Polident denture cleaner. The kind where you put the tablets into water and they fizz like crazy. Years...
Why not just have the car serviced at your local dealer, and then ask them to facilitate the request for the compliance letter? This may gloss...
Correct, but at the same time the Idle Control Valve should get a signal from the ECU to allow more bypass air to combat this drop - and sometimes...
My method is to use a 1/2" breaker bar to remove these plugs, but switch to a 3/8" ratchet or 3/8" torque wrench to install them. I've never had...
You could try cleaning the MAF and clear the code and see if it comes back? A can of MAF cleaner is much cheaper than a new MAF.
Try Bosch 0 280 217 800 There are also Bremi and Delphi versions that come up under the same part number for much less $$$ but I don't know if...
I would put a sticker on the outside just to prove the concept works to your satisfaction before pulling the mirror. The mirrors are required to...
The Michelin PS4S is still readily available here, and is a great tire. The Pilot Super Sport is very similar but the PS4S is slightly better in...
Colorado requires a physical VIN check anytime an out-of-state vehicle is registered for the first time, instead of taking the VIN from the...
Sold, thanks to all who inquired.
Except the 348 and 355 gearboxes are not set up like that at all... The filler plug is on TOP of the transmission and there is a small dipstick...
The last of my clean-out for now. I have a set of front lowering springs for a F355, I received these with my car but have never run them. They...
Yeah, sorry I forgot to get that info into the title and couldn't edit it after it was posted...
More decluttering... I have a complete set of 4 Hill Engineering 11mm wheels spacers and extended wheel bolts for a F355. I used these on my car...
I have an early F355 Non-Airbag steering wheels for sale. I removed this from my car a few years ago in favor of a smaller wheel. I am now selling...
Flosser still makes these fuses in good quality.
Yes, there are many options in both steel and titanium for stud conversions. You just need to properly measure the length you want (with a stud...
