© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Its simply stunning sy !! It always was one of my favorite 348 as I really liked the colour combo. Now the paintwork is done I think it's...
So my new name is rasher eh?? Is that because you only put one rasher in the bacon butties?? Looks better in the flesh. Absolute perfect paint...
And the CAMs are now in my car :) Not sure what my rev limiter is set too. Deffo not 9000rpm but over 8000rpm.
had my whole rack rebuilt in Birmingham UK for £120, Made such a difference.
yep. Bodies are all the same but the valving is different. Any Bilstein agent can change the valving inside, cost about £60 each over here. No...
Heat is probably your answer. Mine were rusty both ends. Don't destroy the solid pipe on the hub, it about £170 over here!!
All hydraulic fluid is 32w. Doesn't matter what make or brand you buy as long as it's 32w
Fixed. A 10a fuse in the footwell had blown which is for the LH turn signals and also the ECU power. I have a LH bulb out so I hope when that...
Fixed, Fues had blown in the passenger foot well. It's marked LH turn indicator but I think it feeds power to the ECU's as well.
I have 340bhp from a stock 348 2.5motronic :) (nearly) The only mods I have are some mild race cams from a 348 Le Mans racer that crashed on...
Hi Guys Having solved the missfire I had I was feeling quite pleased with the car. But today I managed 100m of missfiring and then stalled...
Can't pull any codes because it's a 2.5motronic and not 2.7 :( Lack of fuel is a possibility by the way is started to missfire and then die....
Ernie. We're talking about a different ICV, the centre valve under that opens mid range is working fine. Its the two other valves that open to...
CPS sensor turned up and fitted yesterday. Did you guys know its the same part for a Volvo 760 and Peugeoy 505 2.5l? Well it's made a huge...
intresting, I may put a presure gauge on the rail and see what I get. My FPR is a fixed pressure type, ie doen't compensate for manifold vacuum....
Thanks Miltonian No idea why it has been changed, but the car was converted for to a race car for one season in the italian cup here in the UK....
Back to basics. Had Spark No fuel coming out the fuel rail when cranking Fuel relay is clicking in after I found a dry joint, but the...
Still can't get the car started. Imobilizer is disconnected. Engine turns over ok Good Spark Good Battery Voltage, Correct Power going to...
Well its a little warmer outside so did some more work on the car. I removed the undersheild to get to the Crank position sensors only to find...