© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
This is a nice, straight set of BBS wheels, RS028 and RS029. The fronts are 16x7. The rears and 16x8. From my understanding, these wheels are...
I'm with you. On the second one, I used my pneumatic hammer. The key eventually slid back and up a little. From there, I used the Draper puller to...
I just completed the second cam drive seal and bearing yesterday. Both of the bearings appeared to be in great shape. The seals were completely...
Another week, another Fedex shipment from the UK. This time, it was a Draper bearing puller from Big Red Toolbox. I have replaced the first...
Hi, Waymar. Can you confirm that your car has the sealed bearing that is held in with a snap ring right behind the pulley?
Hi, Martin. That is correct. Mine has a sealed bearing immediately behind the pulley. I removed the pulley this morning. It's definitely a...
To be honest, I'm not sure. I don't recall if I took the picture before I adjusted it or not. That may be the original orientation.
I don't know if the following pictures help you at all, but I hope it helps you determine the orientation. I don't have the car raised high...
Wow. I didn't do any of that. No cutting. No griding. I do recall that I removed the motor while I was fitting it to make it easier to move into...
FYI: I purchased this IMI starter in May. Amazon.com: NEW IMI STARTER MOTOR FITS 1973 1974 1975 1976 1977 1978 1979 FERRARI DINO 308 GT4...
At long last, I have received the ring nut socket and some seals and bearings from Superformance. I pulled the cam drive pulley off and found that...
Yes. That's what I've read. No reason not to do the bearing while I'm in there. Any idea the size of the ring nut? I'd like to get my order...
Never mind! Just found an earlier thread. http://www.ferrarichat.com/forum/308-328/467140-308-cam-belt-lower-sprocket-seals.html
Thanks for your input, guys. My buddy and I were looking at it tonight, and I'm 99% certain it's the cam drive pulley toward the front of the car....
I'm sure this topic has been over 100 times, but. . . I have a fairly significant oil leak that appears to be to be running down the inside of...
I have been doing a lot of maintenance on my father's '79 GTS. I'm puzzled by the behavior of the wipers with regards to the switches on the stalk...
Have you had any luck with this issue? FWIW, I am doing some repairs on my father's '79 308, and 1st gear behaves just as you described. I...
Hi, Paul. The URL below includes a diagram for a 3-switch setup. It is consistent with my '79 308. I'm not sure about the '86....
