© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Just about anything out there beats the original Michelins that came with the car. I went with Pirelli P4000 - although designated H rating,...
According to the 308 service manual the springs are somewhere in the distributor - and according to the 308 parts list, they appear to be near the...
Don't have a "Synchrograph Distributor Machine" so I had to make my own bench tester for my '76 308 distributors (single points). After I set the...
I been here before - With the help with chatters awhile back, I was able to get the timing right on my '76 308 with a 3-7-37 fly wheel but now I...
Yes, yes, yes, it's a dirty job but someone's gotta do it. It's your car - so.... By hand is the only way I know of doing it right. Tactile...
Even tho' I've been doing it for years, I can't get the carburetors working on my '76 308. They balance fine with that SK bouncing doohicky but...
I'm very suspicious of the recore job. Again, I'm very suspicious of the recore job. Is the new core a vertical core like your original? Did...
In some notations in the 308 service and owner's manuals, they refer to the flywheel end of the engine as the rear end and the pully end of the...
Thanx for all the ideas guys, but I solved the problem. Since the initial post, I've learned that the compressor will not operate if the...
Gatsby, Your car is old enough that you should think about doing some radiator work. My '76 308 was 15 years old when the radiator became...
My '76 308 A/C is blowing warm air and I just assumed it had leaked all the R22 refrigerant. Was getting ready to disassemble the whole thing,...
Some guy from Malibu will be asking this question tomorrow. Tonite he totaled his Enzo at over 200 mph on Pacific Coast Highway racing a Mercedes...
I've had the same problem on my '76 308. I took the fans apart, checked the bearings, oiled the bearings, adjusted the bearings and reinstalled...
Was changing spark plugs on my '76 308 and couldn't get one of the new plugs to start threading so I poked my flexible magnet into the spark plug...
Dom is right. The car was originally registered as a 1976 model. But last year I had it reregistered as a 1975 model, making it exempt from...
My '76 308 is now smog exempt in California so I'm considering removing the smog pump belts. I've done this before and there's no mistaking...
I have nearly the same problem on my '76 308, except it pulls left occasionally when braking, especially at very slow speeds. Good to know that...
Ok, I've done this dozens of times, even on my old Ferrari ('76 308). If its a large screw, then drilling it out might work. If the part is...
Having trouble dialing in the carbs on my '76 308. I know about the Colortune - a transparent glass spark plug that lets you see the spark and...
I agree with the warped rotors idea as the problem. If the steering wheel vibrates in your hand during braking, its almost certain to be warped...
