© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
It appears that Engle Imports has another company EnglishParts.com 5775 Venture Park Dr, Kalamazoo, MI, 49009 866.467.1776 They have tappet...
That's Stinks, they still have a website, but it appears the number is disconnected.. Some of the other Jag parts suppliers had a few oversize...
Terry's Jaguar Parts in Kalamazoo, Michigan sells oversize Tappet Shims in various thicknesses (Thicker than stock Jag sizes). I purchased them...
Ivan is correct, they are the same diameter but thicker. I believe they were E-type Shims. Terrys Jaguar parts has an assortment of oversize...
Jonathan, We set the alignment on the car to the specifications in the manual, which are: A L I G N M E N T The toe-in of the ·wheels, measured...
Hi Jonathan, You posted a question to me about the Sebring's Alignment in the Instrument Panel Post. As requested by others, you should try to...
Hi Jhoniks, My 65 Sebring has a different window regulator than the one you have pictured, but I have seen a variety of regulators used on...
It most likely depends on how your car was set-up from the factory. You have two connections on the button one for the center button, and one for...
It may depend on the car and the horn set-up. My car has a directional stalk and the horn is actuated by pushing in on the end of that stalk. It...
That is the drivers side forward part of the fender. (Left Hand Drive Car). Also on one of your other posts you asked about the horns. On the last...
Here are some photos of the brake boosters mounted. Drivers side front half of fender well. Joe [ATTACH] [ATTACH] [ATTACH]
That is correct it is a Lucas ammeter Joe
I do not know about 1966, but the fan guard on my 1965 is part of the radiator and not a separate part. It is only on the top section of the...
If you are referring to the wheel arch closures (fender liners) yes they are aluminum. [ATTACH]
When we put them back in in a few weeks, I will take a picture. They are staggered on a bracket and it is a tight fit.
My 1965 Sebring, has a fiberglass insulated vinyl padding that is held in place with aluminum edging. The vinyl was very thin and has no...
Here is a close up of the alternator tag Joe [ATTACH]
Johnathan, Here are a few photos of the brake boosters Joe [ATTACH][ATTACH]
My 1965 has two boosters. They are both located in the drivers side front fender well. The servo’s are girling, similar to the one used in the...
I used Radici Abetone Carpet, it is a wool carpet, it was very close to the original in look, depth of pile, etc., and has a similar backing to...