© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thank you all,
Thank you for professional advises, will follow.
Thank you will order one tube
Hello all, I am about to put the coolant manifold back in place, The 575 WSM did not mention any form of sealant to the gasket prior to...
Thank you Bill, I will check , website/ manufacturer I checked they have height quality US made hoses including Dayco, Gates, Novaflex . The...
Not at all, one is nylon which do not kink the other one is rubber and kinks
Hi Taz, that is true but no where this two hoses have any similarity, That was the last one Ferrari of US has it in stock. Unfortunately there is...
Any information on after market fuel fill hose to replace original # 167131 which is not available, Sark [ATTACH]
This is the proximal piece of fuel delivery pipe couple inches from fuel filter which got twisted and broke [ATTACH] [ATTACH] [ATTACH]
Fuel tank project continues, finally I decided to go ahead with original pump cover which is about $1000 less than the metal ones even though...
I just tested them and both worked. I will proceed with installation of the pump units and the tank. I will post some pictures.
I value your comments regarding testing the pump, so I should not consider doing that, what about running the pump in a pool of fuel to flush...
Before I start assembly of the fuel pump, decided to check the pumps if they are are okay. I started to measuring of the OHM value of each pump...
FBB, Thank you, it would be great honer and unimaginable help that I can receive specially when I start pulling cams out. I will let you know....
FBB, I have more work to do including replacing cam seals , I decided to wash the fuel tank with weak acid and water mixture to clean stuck rubber...
Thank you all
What I noticed in all three valves overtime they become sticky and do not function smoothly . If you find them cracked then they certainly needs...
Some of our gas smell problems inside the trunk or cabins can be due to different issues including worn gaskets or gas leak. There are three...
The gaskets sits FLAT on the edge of the opening, I have the screwdriver tip on the edge. The pump face sits on the top of it FLAT and then O...
