© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
For $70 you might as well throw that car away and buy another one.... Probably find a really nice one for 70K
perfect thanks
Is there a shop in the Charleston downtown area that anyone can recommend? Thanks,
Originally Posted by tamf328 View Post 50K might buy you a nice 95 but everything I looked at was more than that. may be mileage and color make...
50K might buy you a nice 95 but everything I looked at was more than that. may be mileage and color make a difference as well a yr. this was about...
if the potting material is black in those things they'll eventually fail. Happened with my 348. drive the car in the rain on side would get wet,...
well I do know that the f1 blinking gear light thingy, will blink if the pressure is not at the working bar/psi. goes from blinking to solid lit...
I had the same issue on my 355, turned out to be the Temp ECU. The ones with the black potting material seem to be the ones I've seen/had go bad....
If your hearing the fuel pump relay click and changing it didn't make a difference (suspect the relay is good) then I'd probably start looking at...
This was successful, leak appears to be corrected and F1 functioning properly so far after bleeding the system. clutch modulation appears to be...
I have an F1 in mine, it will go in to neutral even if you have your foot on the brake if you are stop for a predetermined time say in 1st gear....
Noted. Thank you.
I've done many standard type shift systems on my own cars, but not F1. These methods that have been explained to me by long time ferrari...
I've completed the replacement of the seals in the 355 F1 clutch throw out bearing. The old seals were definitely worn. seems kind of lame to...
Only at speeds over 200mph I had a 348 that someone before me did that. I think the springs have an adjustment ring that you can do that with. I...
I owned a 348 for 6+ yrs and now have 355. they are both nice cars but I do like driving the 355 better. performance, comfort, etc is much...
I'm not sure but I like the spider. I think the one that is more unique is that ts targa top one, I'd rather have that than the spider and I...
Does anyone have any information regarding the placement of the seal in the release/throw out bearing. I have the location via the parts list and...
Mine does not have an "O" ring on the cap. Was told if its leaking its over filled....
Anyone on the know how to do that without an SD1 or whatever it is? I heard there is a way of doing it without that tool Thanks in advance....