© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
For the fun cars I have a 98 Viper gts, a 996 turbo, and a 430, which I acquired in that order. When I bought the Viper back in 2012, I used is...
I picked up a slightly used set of Topspeed headers that I installed on my 430 last year. They had already been freshly decked but not installed...
I've also been facing a fail to shift scenario on my 430. About 5 or 6 times now that I've taken the car out for a drive, each time I had a...
Great find for $50! Do you know any history on the transmission, was it just replaced or had it been sitting for awhile? Mostly curious to know...
I'd be curious if they did a wear index value reset when the clutch was replaced. Safe to assume you don't have any record of the clutch change?
Was just dealing with the same issue trying to get the side covers off to replace the headers on my 430 where the soft bolt heads were stripped by...
I had this same issue when I first bought my 430. In my case neither micro switch in the drivers side door were being actuated. For the internal...
I've been very fortunate to be working with Trev on this to provide a 430 for beta testing. My situation is I purchased my 2005 F430 a little...
Jeep SRT8 and 996 turbo. They both need their winter wheels swapped on yet though. [ATTACH][ATTACH] Sent from my SM-G930V using FerrariChat.com...
If you need a test mule 430 when you get to the F430 version I have a spare set of ecu's on the bench and more than eager to start playing around...
The clutch wear index was reading extremely high at almost 7000 and clutch engagement seemed very lazy requiring a fair amount of rpm's for take...
I'd be very curious also as I still only have 10.26 and currently stuck at a PIS of 5.
Any chance this may help with the 430, or too different of ecu version? I still have a pair of spare ecu's but haven't had a chance to look...
Ok good to know, then that would be a big concern. I have been unable to get a response from MS6 to my private messages for quite some time, but...
I've been ignoring the prompt per MS6. I'm assuming it may break things, but was thinking if it did break then a clean reinstall using the files...
Also following this thread as I'm planning to do a full flush and bleed of the F1 on my F430 soon. One piece of information I don't think I've...
Just sent you a pm!
[ATTACH]
I've connected with the software to my 2001 996 turbo. I was able to see and reset several stored error codes that I didn't know where there....
Also fixed the the windows switches staying illuminated. It was a loose microswitch for the small flap on the drivers side inner door release....