© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
This was the actual measurement. I was driving some laps and recorded speed, rpm and shifting on video...
Interesting! I will validate it...
Today I was doing some measurements. This is the result: [ATTACH]
Actually, an (aftermarket) adjustable vacuum modulator is already installed. And I tried already to do the adjustment by drilling the small screw....
Yes. This is the kit.
Hello, my th400 is shifting 1-2 and 2-3 to early. Presumably, the springs in the governor have become somewhat weaker during the last 35 years....
Hello, we tried some gaskets Only Elring + Dirko HT red is working properly Frank
Hi, here are the dimensions of the two different O-rings: (see pic) [ATTACH]
[ATTACH] [ATTACH]
Today I was checking the correct phasing of the distributor. In Position „cyl. no. 1“ there shoud be a mismatch at the hall sensor of -2,5 degrees...
I used the empty Dinoplex case for covering the MSD Al-6. With heat paste. Same place under the hood. Frank [ATTACH] [ATTACH]
OMG ! Thanks Nobbi for the clips. I was looking at Fiat, Alfa, Lancia, Volvo, Porsche. But it is Mercedes. The 463 G-Class! Frank
Hi, do you have problems with the two chain pads #115984 (pos. 10) as well? The pads are loosing the coating. Is there an uprated pad available?...
I was trying to remember „my version“ of doing this... I guesd it was a combination of WD-40 and cutting. Here are some pic. Hope they are...
[ATTACH]
I was checking the Beru ignition cable: 1,5-1,6 kOhm/foot
Hi Stefan, I was trying to figure out how to do the phasing adjustment of the rotor. Is it possible at all? The MSD rotors are adjustable. In...
Ups... So the strategic way to solve the problem (in any case) could be: step 1: - check the impedance of the wire (this is easy) - decrease the...
Hi Guido, no, not really. We replaced the cap by a remanufactured cap supplied by superformance. Actually we aimed to replace the rotor as well,...
Hi Stefan, thanks for your very interesting observation. I did not noticed, that the dark spots could be misfire to the wrong terminals......