© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Was the squeak still there with the ancilliary 'multi-v' belts removed? I have had a couple of those start squeaking (noticeable at idle) despite...
It is normal. Odd, but normal. I have worked on a 2000 spider, a 2000 coupe and I have a 2400 coupe. On all of them the tires hit the front...
It looks very similar to a Fiat X1/9 (1979 on) one: Fiat X19 Console Dimmer Rheostat (Fiat Bertone X1/9, Pininfarina 124 Spider 1983-on) - U8...
It does look similar to a Fiat X1/9 interior light- which would fit for timing and heritage. Might be worth looking at. Cheers, Phil
Yes, that is one. There seem to be a few different brands, with some claiming to be high performance (and costing more). I have always just used...
It looks just like a coil/ignition module off a Fiat Spider 2000 1979 on. The ignition module is a GM part - used to be available almost...
These guys used a 456 engine in a TR250 'representation'. They left it injected, but disguised the injection to (sort of) look like carbs. Amazing...
I would be keen to get a couple, even with the exchange rate. Beautiful job!
I had similar problems with a modified 850 spider - years ago now. The solution I went with was an Abarth one- an underfloor radiator that mounted...
I have just changed the points on my 3-lobe Dino distributor (Fiat Dino, but same distributor) and it was straightforward although fiddly. Any...
Check the battery connections- maybe one is loose. Good luck! Phil
It turns out most of my clocks are inaccessible until the weekend - the ones I could find are missing their knobs. I'll attach a photo of one in...
Can you post a photo? I have a few Veglia clocks that don't work- might have a matching adjustment knob. Cheers, Phil
We had two instances of a flywheel coming loose on a rally car. The first was eventually tracked back to a cracked block- it was a 3 main bearing...
A quick look at your document shows one thing is wrong. The 'v' angle is 65 degrees. An interesting an odd choice, shared with Dinos. I have read...
Is this an 817, 843 or 903? I'm not sure when they changed over. The easy way to tell the (843/817) from the 903 is whether the water pump is held...
I also suggest checking that the brake hose isn't blocked- just loosen it and see if any fluid comes out there. After hearing about this, but...
The immobiliser is aftermarket. I didn't deactivate it- it still works on the fuel pumps and starter circuit with the diagram above- so my...
[ATTACH] Hi, I thought I should update this thread. I had intermittent issues with my 456 not wanting to turn over when warm. In the end I have...
When I changed my starter I took the cats out from that side of the engine, and to do that I ended up removing the centre muffler. Not really as...