© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Note that this article was published on April 1...
It is difficult to shift quickly. What you see in that video is about as fast as I can shift the transmission without it grinding (and the 2-3...
I'm sure somebody here has a calculator for estimating 0-60 times from 1/4 or 1/8 mile data. Here's my best run a few years back at test & tune....
Slowly the tide is turning. It seems that most of the haters have never actually driven a 348, and most people that have driven them have a...
Yup plenty of times. Steering feedback is amazing on the 348 so its really easy and fun to slide around in the rain/snow. In the future I want to...
Your picture is really making me want to get a clean C4 to park next to my 348. I always thought the C4 had the cleanest design of any Vette and...
Whoever buys this needs to insure it with The General...
Thanks for the link I'm going to check this out and try to buy some material
Yesterday I was conditioning the leather on my car and accidentally got a big gloop of the stuff on my headliner in my 348tb. Unfortunately it...
Easy. Just put test pipes on the car and drive around the neighborhood in 1st gear at 8,500 RPM. Everyone will go deaf and then they won't have to...
I suppose I should also point out that the car improves with modern tires. That first video is with some old ****ty tires. This is with new Dunlop...
I like the 348. Very engaging to drive. The handling is snappier than many cars, but when the back breaks away the non assisted-wheel has a lot of...
I'm sure Tim makes good chips but nobody makes better chips than Cape Cod. Can't beat that kettle cooked crunch and flavor...
The 348 is closer to an F40 engine than the 355. All of them come from the "Dino" line of V8s (used from the 308 through the 360), but the 355 and...
I actively avoid driving my car in populated areas because I don't really like all the attention. The stereotypes are the worst part of Ferrari...
You sure about that? [MEDIA]
[ATTACH] Switching from the stock dual disc AP Racing clutch to the single disc ceramic was the first of 3 changes I made to the car. The second...
Ok here's a complete update on what I ended up doing, and what I think of it: I took the car apart in the fall. Everything was soaked in black...
As for the tool, I bought the Hill Engineering one from Ricambi: https://www.ricambiamerica.com/rnt-60-ring-nut-tool-60mm.html It is expensive,...
I used a cordless 1/2" drive Snap-On impact. I believe it's rated to 600 lb*ft of torque, which is higher than the specified torque for the nut....