© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Also Intrax Suspensions from Holland make this cancellation kit. I have them on my car and they work fine. About 500 USD for the kit if I remember.
I had the tool made by a machinist. Basically a deep thin walled socket with a large hole on the side to let the wiring pass through. We used...
Except on very smooth roads, I found the stock suspension very underwhelming. Tried many different things: changed spring rates to CS , custom...
Try Superformance in UK. They are still listing these lifters. I got mine supplied by them. Believe they are aftermarket, but quality is ok from...
I also stick with Motul RBF 660. Best value for money fluid available. No brake fade what so ever. Here in Europe we buy this at EUR30 a litre.
Resting a bit, after a high speed ascent on narrow roads high up in the Greek mountains. Trying to keep up with the AWD power of a stable mate...
That would be a rare failure. I would first change the oil pressure transmitter before going into the oil pump assembly. It's a 5 min job. If you...
Great video! Job well done!
I am using a tiny amount of a product called Silver Goop. Then torque to spec. Normally used for spark plugs in GE aircraft engines. Never ever...
I have the Recaro Pole Positions in my 360. With Recaro alu mounts and the manual sliders. They just bolt in the existing floor anchor nuts like...
You only live once. What's the point of getting a Ferrari and then park it permanently in the garage? Live a little bit!
Own both 997.1 C2 and a 360. Ferrari can be driven DD, but Porsche is a bit more practical and never to worry if there is suitable parking at your...
IMO best way is buying the Alfa Romeo tool. Reference is Laser 3951 and it is not expensive. It has 3 pins, but you can file/saw 1 pin off and it...
Camshaft timing, always an interesting subject. I'll try to chip in. The answer is A: 1 degree (variator disable) / 21 degrees (enabled)....
Just checked it and the my copy of factory WSM says 200Nm with hi strength threadlocker applied. BUT: Ferrari Bulletin campaign No 1232 from June...
160 Nm dry (without any lubricant or Loctite) left hand thread. I hope you have access to a torque wrench with L/H tightening function. Hazet...
Hi gents, first post here ;-) I'm doing an overhaul of my 360 suspension with fresh ball joints, silent blocs, steering rack ends, etc. It's...
