© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Ivan is right, most diagrams are not particularly helpful. However, we did find some value in the set of diagrams published by "C. Groth". They...
With more than a bit of free “under quarantine” time, an update on the Amelia Island Concours outing might be of interest. We finished the...
Hi All- Does anyone have a set of original Ghibli luggage circa 1968. I would appreciate the measurements of both the large and smaller pieces....
My Ghibli coupe windshield washer jets/nozzles have gone missing. As the wiper system is Lucas, I assume these small chrome jets was also Lucas....
All five of my Campy 52's have the same number - 40542. Ed
Ivan- Thank you for your response. Actually my drier matches the one depicted on Table 41 as item 30 (115 BP 65028). The copper tube shown at the...
I'm presently sorting out the a/c as part of a total restoration on my 1968 Ghibli. The York 206 compressor will be rebuilt by local fellow with...
My error:Make that "Starburst". They are 52 mm knock offs from my 1968 Coupe.
Is there a well regarded place in U.S. to send the Sunburst wheels for restoration? Mine are pretty good shape but do have some pitting. Would...
I'm having trouble removing my '68 Ghibli steering wheel for restoration. The center nut is approximately 1 inch in diameter. It has six...
Julian- Mine is a 1968 and my front corners are like yours and are unaltered from new.
Has anyone mounted an early Ghibli on a rotisserie? If so, where and how did you attach the rotisserie arms to the car? It's a long reach from...
I realize this is an old thread but I can add a bit of additional information. My Ghibli from 1968 was totally undisturbed when I disassembled it...
My former painter managed to lose the two gas tanks doors and locks on my 1968 Ghibli coupe. Does anyone know of any salvages doors/locks or if...
I need to replace all four foot well pans and the spare wheel bottom. Julian Merak has noted spare bottom was spun as opposed to pressed. Anyone...