© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I would suggest checking the hose that goes from the throttle body to the lower part of the WUR (control pressure reguator). This line give the...
FWIW, I have a considerable amount of time on the flowbench with the Bosch unit. My results were the stock Bosch does not come anywhere close to...
I can understand your feelings about your car, but sometimes ya gotta let go. No doubt your dad has done more for you over the years, and this...
My observations on the whole shifting topic are somewhat in line with the postings, but go a bit further. I have found that the deterioration of...
In todays world, it is very important to express your feelings. This will help to avoid stress caused by buried emotins. It would be a good move...
I have had excellent results with pipe plugs to close up the opening. 1/4" NPT, socket head (allen wrench type) in stainless are easily found in...
While it is true, life is short, there is another side. People will do to ya what you let them, no more or less. You cannot get walked on if you...
It is normal to get the new pistons in a machined finish. Most MFG's will not spend the extra time to do the finish work, as time is money, and...
Funny how when belts or belt systems are mentioned, along comes the LIABILITY topic. IMO how long you wish to wait, or what belts/drive system...
Fabricating an adaptor may be the only route to go, as you have mentioned, it it a straight thread. I would be suprised to find an elbow that...
I recently had a question on the accuracy of a stock sender/gauge. In order to check the system, I put together a test jig. By welding a nut (the...
Impressive Russ. Very well designed and done. I had thought you were going to duct it to the side, but now that I see how it all fits together, I...
Perhaps the pic will explain it better.... [ATTACH]
IME, the trans shaft should be horizontal when neutral, although I have seen the tilted a slight amount (clockwise as seen looking at them). If...
Rick, I think some is confused on what causes ring problems. t is not possible for the Supertrapp to do anything that could do that kind of...
I'm with Carl on this one. A fuel distributor would need that amount for the down payment, if you could find one. Possibllly a fuel regulator at...
Vern, Scott and Cliff pointed to an item that may cause problems. Stainell hardware has a tendancy to gall, or having the metal "smear" and...
After looking at it a couple of hours ago, and again now, I am still speechless. I haven't been speechless after looking at a car as long as I...
I can appreciate the safety factor, but all things aside, how often do the wheels, and paticularlllly the suspension get inspected? For a Race...
Thanks for sharing those Russ. The Mondy 8 I am doing some stuff on has a different type of set up. Much less complicated. I guess noise wasn't a...