© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I found it not at the parts thread - it looks not discussed
Ok I gone look there - all goes about the control station. [ATTACH]
I have mail around, and Ferrari dealer said - it is the control station = where the temperature exhaust sensor is connected - this cost a lot of...
I use a french fries kettle , and warm up the water around the 80°C - in the kettle I place a small water pump connect with the engine,( remove...
The job is already months ago done, and the result is perfect - no leaks - high speed motor power - no problems. - Attention - the explanation is...
I live in Antwerp and I am a precision parts engineer and producer .
From my Ferrari 348 TS lit some times my dash warning light Nr 17 = "Slow - down lamp cilinders 1-4" -- what did it mean ?
why appears the problem now, after 9 years - if I control the thermostat and put it in hot water (80°) he opens fully no problem , but in the...
I place a new thermostat and the problems are gone ! --The cooling is perfect now --I do not mix coolants I buy it in 5L box -- It must be...
This is a good answer to think about -1) I drive this car more slowly - if we drive crazy, the police take the car impound.But I am not holy, I...
Rifledriver, that is a clear answer , my work is received in this group like a bad amateur - I must leave this Ferrari chat and asks the forum to...
I read further on this site, and read there are after market water pumps with METAL impeller !!! What is wrong with the plastic (high density...
Proper service - you are right my friend go to a Ferrari dealer = 100% OK. No problem - But the streaming now is OK - NO restriction - and the...
Dear friends, I had always a bad engine cooling ,(348TS) but it was not really a problem, but after changing the timing belt i get suddenly wrong...
Dear veteran - I think you buy not new Elring gaskets but old stock - Elring has stop the production years ago , now you can only buy new gaskets...
Dear friends - After many +/- 7 years - I have to replace my head gaskets - water pump problems and overheating ! The torque specifications came...
There is also a good reason to refuse the 90 deg method - after all not all nuts have the same end torque ! , and the two method end in 100 kg/m....
I use this key, first 6 kg/m -second 8 kg/m -and end with 10kg/m -- no 90° - it takes 6 minutes to torque 1 head, - after 2 year I have no...
