© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks for replying Urs , I'll keep searching
Hi afterburner I realise thread is from 2016 but if you still have this pulley assy Id like to buy it . Regards Mika
You guys know it's a fake 328 right?
fwiw have a coolant overflow bottle installed on my 308QV after seeing this recomended on fchat a few years ago . Works great I no longer have...
I had a daily (sr20 nissan) years ago that never used oil , then 1 service I swapped it out from Mobil to Shell Helix and it started burning oil ....
Sounds like you got bad fuel if it suddenly started doing it after u filled up , I would refill it with fresh fuel and see if it persists.
Lmao thats hilarious
Not an 308 but nice to see Nico pushing the F40 and his reactions afterward . [MEDIA]
Thanks for the tip and mini tie rod end part number Andy. I just bought a pair of these and I had no problem with fitment.
When my qv had a sticky throttle I found the inner cable was freyed . New cable is the go as stated above.
I got my 308qv cold with a/c by blocking all the vents at the firewall from the front blower motors as all they do is pump in hot air from the...
I have poly bushes in the steering rack mounts and they are the same diamentions as sway bar bushes. Steering feels more direct compared to stock...
The compressor upper mounts are 2 spilt rubber bushes and a steel sleeve per stud , if you remove these you should be able to clear the timing...
0 weight grease is prefered , and yes use the springs behind the cups for inner tie rod ends . Heres a link to a Pantera steering rack rebuild...
I had my 308 recharged with R134a by an mobile A/C guy and it only stayed cold for 3 months . After a bit of research I bought a vacuum pump and...
[ATTACH] Heres my 84 GTS , Brisbane Australia
I agree with Mike just replace them .
Thanks for picture mine has a nyloc nut on that bracket , I will have to swap it out.
You are right Mike its the same size and thread as the cv joint nuts just slightly different in appearance , that was my 1st thought as well
Thanks for replies , my alternator brackets currently have nuts (unsure if they are the orignials), maybe this nut was wedged somewhere on the...