© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I replaced my RH radiator with a Saldana Racing Products radiator about a year ago. I had a small leak at the base. It is far superior to the...
I am really curious about these systems. It would make sense to me that an ABS system specific to a track or race car is calibrated to that car's...
It's an interesting question. I'd venture a guess that that circuitry is identical between the 2 units, I'd bet ATE had this unit already...
The ecu is actually an ATE component. ATE also made the abs ecu for some Ford and Lincoln models in the late 80s and used the same ecu with the...
Thank you both very much for the help. I unplugged relay 186, the fuse blew. Uh oh. I then unplugged the ABS ECU, with 186 out and the fuse was...
I do have a cutoff switch, I shut it off when I pull the relays out. I did get as far as testing with relay 182 pulled and it did not blow the...
funny you should say that, I need to go pick up more fuses tomorrow. Thanks for the reply! I'll do some more testing tomorrow and try your...
I am bumping up this old thread. Yesterday my abs light stayed on constantly. I have the same symptom as ctanner. The 3 amp fuse protecting relay...
At no point did I claim to understand it. I think I've made that abundantly clear. What I do know is that it happens, especially with 348s most...
The crank sensor may have nothing to do with it. I misunderstood. I just read a post from Miltonian in 2005 in which he explained that the...
I don't know, I'd like to understand more. I've watched Andy Holman's video on re-greasing the flywheel many times. One of the things I've...
disengaging the clutch doesn't help. Somebody smarter than me may chime in, and there are lots of threads referring to the issue. In my...
Eventually the kluber grease breakdown will cause hot starting issues, if the problem is not present already. I am nearing that point. After a...
There are drain plugs in each radiator and freeze plugs on either side of the block. The freeze plugs are not easy to get to. I went to flush my...
For local fare and atmosphere, Clancy's is one of my favorites. It's not in the quarter/tourist area but a short cab ride away. WW2 museum is...
my targa top was scratched and dented from years of use when I got the car. I brought it to a local paint shop and had them color match it. I...
I am thinking along the same lines. It's not broken right now so no need to fix it. I have good voltage to the solenoid and the starter spins...
just to close the loop on this, I think 75% of my problem was self inflicted. After I learned how the Denso starter solenoid works, I realized...
I'm not much of photographer, but here are a few my wife/Navigator and I took. Incidentally, I may need to interview navigators for the next run....
Some good news I think. I ran and got some 12 gauge wire, attached a female spade connector and plugged it into the solenoid. When I touch the...