© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Compresses down to 2mm gap. The old ones were fully collapsed with no gap.
I could not agree more. I looked for months back in 2011 for a manual coupe of pretty much any color. It had to be a manual not flippy top because...
Thank you. JBWeld Plastic Black Epoxy bonder. It is advertised as fuel resistant so dealing with vapor should not be a problem. Looks there are...
Least expensive is $360 and sealing it should be easy so I will refill the canister. I could not find a substitute canister with the same shape,...
After bumping into the article, I just removed mine and it was not that difficult but maybe ai was just lucky.. I did not remove the grille but...
Snapping off the tensioner seems to be common because it is reverse threaded and once you have bottomed out the bolt thinking that you are...
Those are very good tips. I used the Dap and did not feel like messing with the spray gun so lightly applied it with a brush. Mistake. That is not...
Lots of choices on the foam with a material backing. Google it. Which one is best? I used Dap Weldwood adhesive as others have mentioned.
I have always had the butterfly valves rattle a bit when first started on my 2002 360. For 1 to 3K for a replacement intake assembly, I will now...
Many of us have fixed the stickies ourselves as well as removing the dash and pulling the leather back in place but it takes a good bit of time...
I made my own set very easily with straps, buckles, etc from Tandy Leather online.
Interesting to re-read this after installing the part in 2013. Still solid with no play. 1st time anyone has mentioned the Hill replacement not...
Thanks for the info. I will just keep the 20/50 oil to remind me of all the great times I had on the track.
A question for Rifledriver. I quit racing(Porsche 911) and still have a lot of Brad Penn 20W50 oil. I am in deep S Louisiana where it is hot and...
Right. I thought that the talk was about countersunk washers like those used in some parts of the interior. My mistake. The discussion was about...
About the "Ferrari" washers with an id too small. Drill it out to the size that you need. Again, What is so hard about that?
If you want conical washers start with flat washers, put them on a vice with the vice jaws spaced just right, or on a properly sized nut, seat the...
"Shaking noise"? Rattle, clunk?
Sounds like you would have an EV or Prius as a daily driver.