© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Scuderia - San - Antonio There is only one and someone has beaten you to it. If for some reason that sale does not go through, I will let you...
Tubi Style Test pipe for some 308s, [ATTACH] [ATTACH] [ATTACH] 328, Mondial, 512TR and Testarossa (for which you need two). Installed for only...
Good powder coaters have a color/finish which matches the original. It shouldn't be too expensive and will be durable. Mine came out beautifully.
Three from different sources. All in one MC are the same. Carefully measure your originals and "go big" within reason. The difference between...
Good to know if that fits! Also, remember that there is the crucial clearance between the master and the servo to consider if you are replacing...
I recently rebuilt the master for a 1984 QV. I just want to warn you that I discovered that there are three, not two, different sizes of seals in...
I will add that I am quite sure I have the same set up as you and everything: injection, AAV etc. was functioning well. I also originally had a...
It may seem unsophisticated, but I like simple and reversible solutions. I think the dowel was around three-quarter inch OD. After some...
I believe my late 1984 US 308QV has the same set up as you do. I experimented with partially plugging the AAV hose with an appropriately sized...
What's with you Houstonians and jalapenos??? My Brit friend from Houston is obsessed by them and she pronounces the word with the emphasis on the...
Proper resistance in a sensor does not assure that it is OK. I had a bad one and they all tested fine "on the bench." Are you 100% sure the boxes...
I've been a car guy for over half a century. Every car guy wants a Ferrari at some point. I considered a 360, but I've always loved the 308 and...
Bad Digiplex grounds are a known cause of strange and unpleasant problems. Some people advocate a special "auxiliary ground" for them which I'm...
Again, many thanks. This is all very helpful. May I ask: is there a 2K clearcoat which is preferred for models?
Many thanks for your helpful replies. Much appreciated. One more question which has been bothering me: I have gotten a beautiful finish on several...
I own a full-size 308QV and have enjoyed building scale models since I was a kid (which was a very long time ago). I built the 1/12 MFH 250 GTO...
The gated shifter mechanism is easy to clean/refurbish. Just remove the center console. If the bushings look awful, replacing them may solve the...
Where did the master come from? Did you rebuild it? There are three, not two, different sizes of seals for 308 masters. I had a similar problem...
Mine turned out beautifully with the two-part plastic stencil. But it took some experimentation. Black crinkle paint first. The "trick" is that,...
Inner: Clockwise - pads closer to rotor. Outer: Counterclockwise - pads closer to rotor.
