© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Very good thread. Just to add here for others as I had difficulties to remove. You can simply move the clock/odo/4-gauge unit sidewards in...
Hello all, Here my 3.2 coupe from 1988 Just follow the Link and contact me for any questions https://www.tutti.ch/vi/51011938.htm Sent from my...
All, Cleaned both MAF sensors with break cleaner today. Now engine starts at first try and idling is stable. Also accelerator feals more...
Hellow, See old (blue from Bosch) and new (from Mahle up side down) on 3.2 Cabriolet from 88. Take care about the arrow which indicates the flow...
Hello all I'm new in this thread and a passionated owner (and mechanic) of Modena and Mondial 3.2. If there is anybody near Schaffhausen and...
Thanks for your feedback. Although spare part list from superperformance stated that it can be used on the 3.2 Mondial as well. Anyhow will not...
Great post, my doubt is just about the piston diameter as my original MC (on Mondial 3.2) has D=11/16" = 17.46mm and the Marelli D=19.05mm
I understand the mechanism of the turnbuckle to shorten the cable. However just wondering if there should be an automatic mode by turning the...
Hello all, for reinstalling new pads I winded the piston back into caliper. Now after installing should there not be an automatic mechanism to...
Anybody knows the partnumber or proper replacement for this spring? Can only find in the brake pad kit. [ATTACH][ATTACH] Sent from my MAR-LX1A...
Did it this week too. Easy job if you have little patience. Using of a small impact wrench to remove the M6 bolts helps. Ferrari Germany told me:...
Recommend the green "Zentralhydrauliköl" from Liqui Moly. You will feel faster gear shifting. Sent from my MAR-LX1A using FerrariChat.com mobile app
Hello All, I did a hole into the diffusor as well and covered with black tape. [ATTACH][ATTACH][ATTACH] Sent from my MAR-LX1A using...
Hello all, Thanks for your inspiration. I tried the following by using the slave cylinder "BOSCH 0986486573" (mine was a replica by another...
Hello all, somebody please can tell my the correct dimensions of the quadring / X-Ring ? Regards from Switzerland