© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Awesome graphics. You are great. I checked that. It is done the correct way. Or so it seems. I need another set of eyes or something I guess
Are you saying to leave it loose then cycle it and it will get itself right?
Yes. I spun it to take slack out of the bottom then the top was loose. I've gone crazy trying a lot of stuff. I know it is something really simple...
I tried that too. But it is way too loose if I go that route. I think the wraps are right now. I just need a 1/4 inch of slack...if that. I'm...
I really appreciate your time and thoughts. I will try to do as you described. I'd buy you a beer for your time but... I guess it is time to go...
No. I didn't undo them. When I took the housing and motor out I just loosened the tensioner and removed the 3 nuts. I then wiggled it out. I never...
It is assembled correctly. It is in. The holes are lined up w the bolts on the housing and it is secured. It is just that the cables are really...
Thanks for your help. I double checked everything you mentioned. I checked the exit from the pulley. Looked correct. It has the proper wraps as...
At first I could only get the mount in without the motor attached. And everything was perfect. Once I attached the motor to the mount and tried to...
I left the cables intact. I have checked and rechecked the routing. I finally got the housing and motor lined up but had to wrestle to get the...
Good morning, I removed the window motor and housing from both sides of my 1985 308 GTS in order to replace the grease in the housing. The motors...
Good morning all. I am new to this forum. Birdman suggested I try to get help here. I am trying to replace the heater hose (along the...
