© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I was thinking of asking $1600.00US. Looking at what Eurospares and other vendors are asking I thought that was a fair price. It comes with the...
Purchased this Ignition lock a few years ago after my 83 QV key lock cylinder cracked. It wasn't drilled for the warning buzzer switch so I ended...
Did my seals a couple of years ago. FWIW it has no shoulder either, not sure what the update was part looks identical to me. [ATTACH]
Definitely have some strange things going on, the quick disconnect tells me its a R134a hose and fitting. The fitting that screws to the can...
I purchased a Dryer from Superformance back in March and it bolted right in on my 83 GTS. The part number is 106647 if that's the one you ordered...
lm2504me is right the cylinder is cracked. I was using my spare set and started having a problem with it turning, switched to the original key and...
The key won't turn, something in the lock cylinder is catching. I can play with it and get it to release but it's a major pain.
Anyone had any experience with rebuilding or having a lock cylinder rebuilt? Lots of post of the subject but I haven't seen anything on...
I've had good luck with Superformance out of the UK. Prices are good and in most cases the parts are on my doorstep in a week.
I would start by inspecting the hoses. Do you know if they replaced the hoses with ethanol resistant hose? I had an issue with a car I replaced...
Wow, that's interesting. I wonder if it is the original oil or a dye of some kind. This is the first euro a/c system I've worked on never seen...
Drained the oil out of the compressor today looks like someone used ATF in place of mineral oil for whatever reason. Spent half the day flushing...
Purchased my 83 QV a couple of years ago. Prior owner removed the A/C compressor and the system has been open and I'm trying to get it going...
Automotive manufacturers use rubber bushings to reduce vibrations from transmitting through the suspension to the passenger compartment making the...
I used the Energy Suspension Bushing and have been happy with them. Birdman's site has a good tutorial on installing them. He uses a press but I...
The access cover is removed in that shot. It doesn't look it but the hose extends about two inches threw the cover. This photo is two years old...
Brian, I attached pictures of my 83 308 QV before I changed out my original heater hoses. On my 308 the heater hose runs along the side next to...
I'm not an expert on powder coating but I believe they have high heat tape that they can mask off the metal outer bushings with. Not sure if your...
As far as I know all 308's used the same design and would stand to reason that they all used the PTFE washers and bushes. If the PTFE is worn and...
When I did mine the only thing I changed were the Thrust Washers (9) and the Inner Bush (8). They are coated with PTFE (Teflon) and mine were...
