© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I already went thru this and answered all the questions (see my post May 13,2023). Slight typo in my post, the Jaguar part # is JLM 1907 (not...
Good info. I did a lot of DD on this. A lot of stories but most of them incomplete and not transparent...Especially from the vendors... The...
Hi Johnk, I need an accumulator for my 328 ABS. I came to the conclusion (after researching) that the Jaguar JLM-1907 OEM (still available and...
I think some might find this video useful. Flushing and or Bleeding the rear circuit on the Teves ABS for 328/348 using the car's brake pump is...
Hi, you may want to look at this regarding the clutch side of the system...That side is clearly passive and people neglect bleeding. [MEDIA]
I did some more research to answer my question as to wether old brake fluid stays in the low pressure side of the system (gravity feed thru hose...
Anyway, I will go thru the long form procedure for peace of mind...All it will cost is some extra brake fluid and some time...I will let you know...
Hi Extreme1, the newer ABS systems like on your F430 are much more sophisticated and involve a separate system with many more fluid lines and...
Thank you raemin. I have already done the brake fluid flush with a power bleeder (I do that regularly on my other cars too). When I did it on the...
My question is not about performance, brake lines and callipers...We all know that...It is about the electric PUMP...I just can't see how a pump...
It's up to you to share thoughts or not...But I think this particular topic is important and worthwhile clarifying for many fellow 328 ABS and 348...
Hi Rifledriver, I did further analysis on this subject and I would like to reopen this discussion with you because you are one of the few here...
Tried that...The potential US suppliers I checked show the original SWF (BMW) part as available but when I spoke to them the truth is that they...
Thank you once again Rifledriver. Your advice is well taken. Cheers! On another matter, just as I was trying to get the car out after doing the...
Hi Rifledriver, Your help and comments have been golden to me as I went thru the front wheel bearings servicing on my 328 GTB (ABS) last month....
While I am at this why not include a few more tips to ensure things go smoothly: 1. To de torque the hub nut (with car up and wheels removed), I...
Today I did the left side bearing disassembly, cleaning and repacking...All went well. Found a little less grease on that side but bearing didn't...
Well, better be safe than sorry. From what a saw on other threads, pullers, blow torches, demolition hammers, 5 ton presses...At least I didn't...
Sorry, outer side bearing picture was missing. Seal untouched. [ATTACH]
Hi Rifledriver, I took out the right side bearing this morning with no issues (pictures). Bearing is good for sure, grease is a bit contaminated...
