© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Make sure it’s not the A/C compressor. They can knock sometimes when they are going out or when the clutch is bad.
I have a Launch tool so I can check it out this weekend. any particular codes to look for?
I haven’t explored those because I’m not familiar with where they are and what they do. What is the function of those?
I have this same problem with my passenger side. It caused the brake on that side to overheat once, so I removed the central pivot and apply some...
Thanks for the reply. When sitting still in first gear and foot off the brake the car doesn’t creep. Wouldn’t that be a sign of PIS being too tight??
I have a 2006 430 spider I’ve owned it about a year and did the service work before I put it on the road. Last summer when I was test driving the...
Any photos? This could possibly help me as well.
I sure would like to get a copy as well!
So does the cable in the fabric do that function of splitting open the buttress, or one particular elastic strap that does that?
Do you have any pictures to demonstrate this? It would be really helpful. I think I have this issue.
t Yes that was me. I replaced mine through the cabin and I didn’t get one of the clamps tight enough. The hose popped off during a spirited test...
When it comes to cleaning aluminum, you have to be careful of what you’re using. A lot of degreasers are a very high pH product which can cause...
I’m exploring the riv nut tool and kits now. If I find one with good metric ones, I’ll post it up here.
Do you have any detailed instructions on doing this? Or a parts list?
Mine has been removed and was poorly put back in. I was considering removing it and installing riv nuts and using black cap screws to hold it in...
My passenger door is doing the same thing. I changed the seals on both doors with your same results. We really have to slam it hard to get it to...
Do you need to input radio code?
Which brand of seal did you use? I bought an updated seal from Verrell and have had no drips for two years. Might try him.
From the outside they may be a little swollen and super soft. But when you remove them, the insides can have splits, and the rubber doesn't have...
I replaced all of my hoses on the 360 when I got it. Including the ones up around the radiators in the front bumper. The ones that I saw that...