© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
The whole unit, I see. Love these simple older cars. Thanks again!
Hey guys! Can anyone tell me where exactly the HVAC control unit is? Thanks
I believe the new supplied AP clutch had them tacked on,I'm going to double check forsure but im almost positive there there. Thanks for the tip!...
Not really interested in how long you have done "this" for, I'm dealing with something that usually really shouldn't be an issue. At this point...
I understand what your saying but, even if a flywheel not resurfaced, should that really affect pedal feel? the car ran and drove with the old...
We also removed the flywheel again, checked clearance and made sure it was sitting correctly. Everything looks ok
We did not resurface flywheel with a machine shop. We cleaned it up minorly by hand. there wasn't any heavy hot spots or anything .. as for the...
We pressed the flywheel out of the housing, split the flywheel housing following "my348.com" procedure. cleaned all the nasty old grease out of...
Thank you all for the replies. We took apart the entire system again measured all related parts - everything is within spec. We compared it to the...
Thank you for the quick response. When we installed the new plate, the fingers moved quite a bit compared to any other clutch assembly probably...
1991 348ts with factory twin disc clutch assembly. Over winter we did some digging and found some oil leaks coming from clutch/flywheel area....
Hey guy have a costumer with a 91 348, both engine lights are on at idle and while driving the car will stumble aggressively (similar to a...
