© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Update: bled the brakes profusely using multiple priming of the ABS pump, bleeding the lines properly at the calipers, and further pumping the...
Thanks @franschman !! Do you recommend a certain PSI (air pressure in PSI or metric) of air to inflate to? Thanks, -w
sorry! what I meant to write, was "from our esteemed member, @User-C3 "
Thanks again to all who offered advice. I purchased steel angle iron and "opened" up the 90degree bend to allow the Jag/Teves pump and...
Could you please clarify? I am going through this process right now (front circuit only). Do you bleed with the ABS system running (once fully...
t I purchased my 1995 GT 6speed (19k mi ODO at time of purchase, one owner car) from CHMC. I had the "choice" - the Hilfiger car was right next...
SORRY...for perhaps the bad photo. Behind the accumulator ball is enough space to make a fist with my hand and probably still have another couple...
Here are photos. The green actuator switch is positioned to the right (I am standing in front of the car facing it...and it's a LHD car). The...
Part Numbers: I also noticed that my (456gt) PN is 10.0511-9020.1 and all the Jag ones on eBay/etc have a different PN (10.0511-9023.1)...can...
...and I found some photos online of the pump mounted in the 348 (per this thread)....does your bracket essentially "flip" the mounting direction...
Yes, I will...not near the car today...but later this week. However, you mentioned something in your earlier post....It seems almost certain you...
This is awesome, folks. If you see my other (recent) post, my ATE/Teves pump failed in my '95 456gt. This is the same pump/part number as the...
I have a leaking pump unit. Enough to drain the entire reservoir during a 60 mile drive. It was leaking down the firewall into the undertray and...
You all likely know the punchline of this, so let me put the facts out there first; car never had cabin/trunk area gas odor prior (drove it for...
I am replacing a cracked fuel pump cover on my 456. The OEM green seal/gasket is mangled and the 456 PN 126835 is relatively hard to come by (as...
Sorry for quick/terse reply, was replying from mobile device. You indeed COULD be the source! Do you have the proper 456 in stock and ready to...
You are accurate, but seemingly the 456 (which is also same as 550 one) gasket is unobtanium right now. Do you have a source? I was wondering if...
I removed my (1995 456gt) fuel pump cover last night due to a crack (have replacement cover already) and found the green seal o-ring to be...
Blu Swaters Metallic...named for a high-end/bespoke customer of Enzo's back in the late 50's or 60's.
Appreciate the prompt reply. Presumably the "tell-tale" sign is oily residue on the shock body?