© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
This is the wrap up information. Finally, the all issue was solved. When I replaced the radiator by Nick Forza's one, I asked the issue of higher...
Sorry. I did not check those discussion because I have been away. Today, I will inform that this issue was solved! Finally I converted the...
FYI I did the follows additionally at this maintenance; - I inserted a tube into the upper hose tube of the expansion tank so that it prevents the...
under the scorching sun.... - Firstly, when I met a traffic jam, I found the water temp gauge went up just before 250F (maybe). - I felt power...
Thanks for the precious information. I think that this is the worst case for me, but if the situation was not improved even though I replaced the...
I also supposed this case. So, I did leak test. But in any cases, the car could run without problem as long as outer temp is not so high just...
Yes, actually the overheat happened. I also faced the engine stall. So, I'm quite sure that the problem is in the cooling system. In order to make...
For your better understanding, I think that I need to write the history of the car. - I bought and imported this car from USA in 2018. And after...
308 milano, Thanks for your advice. I'm quite sure that the temp gauge is OK. I have ever seen the high temp and the engine staled, meaning that...
Thanks for your reply. The radiator professional de-soldered the end caps, and using a new core, he soldered back.
Thanks for your reply. I re-checked the fans and I also add a pull type fan at the back of the radiator. And even though I run the car around 40...
morcal-san, thanks for your comments. I also thought as you think. I supposed that there should be clogs or some restrictions in the system. So, I...
Thanks for the all commented for this issue. After that I tried several things, but the situation is not so good. What I did are; - Head gasket...
Thanks. Well I already noticed my Evans include water... In order to avoid excess argument I tried to delete those photos, but it seems that they...
Thank for your comment. I see... It means that my test is not enough to conclude that there was no problem with the cylinder gasket? So, should I...
tuttebenne, thanks for your comments. This time, the temp was at 195F stably. No. In any cases, I will check the clog of the heater cores...
Thanks for your comments. As it is very difficult for me to explain in English correctly, please see this picture. I filled the coolant up to this...
Today, I tried a radiator leak test using the tool shown in the photo. [ATTACH] After the pressure into the system, I left it more than one hour,...
morcal-san! Thank you very much for the information. I see. I could not find this method in the Forum. It sounds easy. I will try it soon.
(Firstly, sorry about my poor English.) This is my guess; 1) The tank type is vertical. There is some air at the top of the expansion tank. 2)...