© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thank you for taking the time help. It's similar-ish but the centre section is narrower, the inner screw caps are different and I cannot see the...
Ah! They will left hand drive and over the pond from our tiny island
Within a steering rack and pinion is the rack. We cannot work out how to get the rack out.
, The right half is bent upwards. I have it on the bench but along with another very experienced and knowledgeable mechanic we cannot see how it...
Steering rack £500-600 plus tax, though this is the price for left hand drive. Me £000.00. I'm trying to find what other car this was fitted to...
True but would you tell a builder to get someone else in to do his work?
Has anyone rebuilt a 360 steering rack? I cannot work out how to remove the rack.
I read Windsock feedback just after I had posted the result. I had not read it earlier as I have been consumed on this conundrum and fixing other...
Clutch problem/gear selection solved. Totally flummoxed after changing the clutch master cylinder and it still won't go into gear. Laid on the...
Master cylinder on a manual.
I am about to order some seals for my clutch master cylinder. If someone wants some, they are £35 for the 2 internal seals (UK). Piece of cake to...
It's air getting in from the master cylinder. Having some seals made
Free play taken out. No difference
No blockage. Fluid flows freely.
That's my thought. My pump up Draper pressure bleeder cap is too big a diameter. I am waiting for the shops to open after the Bank Holiday to buy...
I have had the gearbox off. All components are good. The creaking is the noise of the pressure plate springs doing their job
Adjusted the pedal and all it does is move the pedal back and forth. Thrust bearing is moving about 1cm
Yes and I can hear it creaking as it moves. Resistance of pedal increases very very slightly when moves ⅓ down and then it moves the thrust...
Bled it again. Pedal moves ⅓ before I hear the pressure plate creak. Renewed the seals in the thrust bearing. Trying to find pedal adjustment infi
