© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Couldn't you just attach an Ohm-Meter/Connectivity-Tester (Multimeter) to one of the nuts on the underside of the mesh/subframe as well as to the...
Good point, I'd say. But isn't the fact that the paint on the outside body part is bubbling and that the nut bolted to the inside subframe is...
Realizing this is an absolutely minor question, I would like to ask nonetheless. I have had my F430 interior switches refinished and have just...
What I was actually trying to say is: even if the mesh would be made out of plastic entirely, wouldn't the nut and washer (presumably) from steel...
Hi there, I am looking at this thread from two different angles: first I am considering to buy an F12 at some point; second, my F430 Spider has a...
Just wanted to bring this one back up. After ordering both the "Smart TSL ECU"...
Wouldn’t that mean, that shifting gets “reset” to smooth every time you disconnect the battery using the trunk-mounted cutoff switch?
Is it only me or does anybody else think, these desperate attempts to get a tool for deleting Ferrari Immobilizers with odd email addresses by...
No worries, none taken!
Thanks. But I am neither of that profession, nor a graphics designer... ;)
Hi guys, last winter I spent a little perfectionist work on making over my two F430 keys. I cannot really explain the ugliness of the keys, as...
Congrats on the progress. Actually, I only need a small hint. Carpet cover is still taken off. Is the Spider roof controllable through the ECU?...
Hi guys, I was talking with the Ferrari mechanic the other day about the functioning of the F430 E-Diff. What he basically said is that the...
@360trev: I did install the ScudIng electronic relay the other day and wanted to get the ECU information from the label for you. Am I correct in...
Hi Dan, just wanted to check back if you had the chance to see if it is worth to remove the panel on the F430 or not. Is the F430' antenna...
I just replaced my rotten rings with this O ring: 17.5mm (inner diameter) x 2.5mm (CS/thickness) in NBR 70 (seller on AliExpress is called...
That's what I suspected. Are the F430's ECUs in the same location behind the engine side panels like shown here for the 360:...
Yes, I had read that PR/Marketing bs before asking. As you had attached it to the first post of this thread, it was hard to be missed. To be...
It was asked a long time ago in What is an E-diff?, what is actually the functional difference between "standard" slip diffs and the E-Diff. Is...
These seem to be OEM for Scuderia/16M only, right (picture below)? They seem to be missing from the standard car's explosion diagrams...