© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Take it to Ferrari of Washington (Northeast of Dulles airport). The fees for VA safety and emissions inspections are set by the state so you'll...
Thanks - a good warning message. Fortunately, the shifter plate is not limiting the shifting in any direction. It's bothering me that I get a...
Thanks for your response. Your information tends to point to the "F" coupler in the diagram provided by Tazandjan above.
Thanks for responding. I've pulled the shifter plate, looked around and found nothing. No coins in the compartment to cover the next annual...
You are always very helpful with your F-Chat posting. I agree that the "F" coupler looks to be the only joint with potential threading. I don't...
I've been unable to find a posting on aligning my 550 gear shifter. Mine sits a little north of the gated plate centerline. The position is not...
Sorry to hear that, but thanks for sharing.
I bought my 550 almost a year ago and had Loudoun County Exotics "baseline" the car before driving 6,000 miles this past year. Greg Miller found...
Very Nice Work! Your chart has amazing resolution AND COLOR. I'm sure this will help others with future ABS and suspension wiring issues. As...
SUCCESS - There was too much resistance in the ground circuit. After several months of intermittent work on installing/configuring a Rostra...
FYI: Unable to register - The site is no longer active as of May 1st 2019
I'm the 4th owner of an Azzurro California 1999 with Cuoio Leather, how do I gain access to the Hilary Raab database? I'd like to compile the...
Still unable to get the Rostra CC to function on my 550. Dave, thanks for your installation instructions. Our approaches for throttle linkage...
[email protected]
BACK ON TOPIC: Dave, I was swapping the working CC in one of my other cars with the one I got for the 550 and noticed that the 550 connecting...
Not to worry --- this is a challenge, not a problem! My grandfather was a mechanic and said: If it can't talk back to you, you should be able to...
OK, I removed the Clutch Disengagement Switch from the circuit. I verified that the CC Red Brake Positive wire is connected to the +12 Volt hot...
OK, I made the change to have 3-5-10-12 set to ON. Seems to engage and then drops off (will not hold speed). The same result as with 3-5-9-10-12...
Dave, Thanks for responding. I knew you were engaged with past threads and was hoping to get you engaged again. Clarification from your response:...
