© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
isn't this obvious? it reads knock sensor(present, not absent), so replace that particular knock sensor ( there are 2 on each side I remember)
why do you want to replace the harness in the first place? its a very rare endeavor. I did that when I swapped my 360 to a CS.
i've been installing batteries for 360/430 for many times and never seen this thing. but it does seem to be belonging to a battery securing part...
oh, I though the OP is to replace the harness with a brand new harness. Not to replace individual connectors
doesn't seem to be OEM, but I could be wrong
looks like a 4 hour job for me
ok, so, to wrap up, me and a good friend made a conjecture that there's a leak around the hoses that leads to the intake manifold, see pic...
To do a smoke test on the EVAP leak, what is the injection point? [ATTACH] [ATTACH]
F430 2007. Do I remove the gas cap and inject smoke there?
maybe my smoke check wasn't done correctly? Does any one know what's the correct smoke input port? I put smoke directly through a hose that...
replaced the evap test pump. Didn't work. p0442 comes up again after 30 miles. any other possibilities? possible the carbon canister isn't working?
have you ever seen any application that uses current varying with load as a signal to do controls?
no idea how the operation works.
[ATTACH]
a pic from disecting job. done by ananymous any pressure sensor here? [ATTACH]
so ,... I stole/borrowed a diagnostic pump from a friend's 430 that he entrusted me for about a year while he was in Bahamas maybe. I'll swap it...
didn't drive the car for the last few months recently upon driving it, 100 miles later, it reappears.
The cel won't appear after hundredes of miles , so now I don't know. I'll just keep driving and if it won't re-appear after 1000 miles, I'd...
for what its worth, i disected it [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
so I removed the valve( total of 2, I only removed one) and got a new one from the local bosch dealer. I tested the new one and it seems that it...
