© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Yep thanks for that, sorry about the stupid question really, just seen photos comparing the two, water cooling channels etc are very different, I...
Can anyone tell me if the 2V fuel injection inlet manifold has the same fixing pattern as the 4V manifold? I.E is it a straight swap to put a 4V...
Pictures of corrosion, only seems to be in the water channel area, so I’m hoping that with silicon and a new gasket it should seal ok, or do I...
[ATTACH] Sent from my iPhone using FerrariChat
Thanks for explaining, makes sense now Yes maybe that’s why I’ve seen coils that say conforms to …… law in the us Sent from my iPhone using...
Wow that’s a considerable amount more corrosion than on mine, I’m hoping to get away with them as they are, and a little gasket sealant when...
I presume that’s why Ferrari used 2 coils one per bank just to allow the time for the coil to charge, rather that feeding the whole 8 cylinder off...
Does anyone have any recommendations for changing the coils if I’m installing electronic ignition? Currently 2 x Magneti Marelli 801A ecu’s...
BTW just to say the front manifold was a real pig to get off, the rear manifold I managed to remove with a big hammer and a lump of wood to break...
Hi Steve, Just found your thread and yes very interesting, I’ll certainly be taking your advice when the new gasket goes on [emoji106] Sent from...
Hopefully a useful post for other users to remind them to not forget about the gasket in the intake manifold, after stripping down my recently...
Was thinking of ease of access as I don’t have to get to the flywheel, Ive found a 100mm wheel with 36-1 teeth at less than £20 so seems the...
Ok so I need a trigger wheel and sensor for the new ignition system ( whichever I chose, not sure yet ) so here’s an idea:- I have a redundant...
I was looking at changing the throttle body anyway for one that has throttle position sensor and found a 70mm diameter one (66.5mm stock) so that...
Someone recommended an adapter from a Skyline that could work with these injectors? Raceworks FSA-501BK4 Sent from my iPhone using FerrariChat
Sorry not a QV it’s a 2V 1981 GTSi Sent from my iPhone using FerrariChat
I’ve found this Bosch one, is it worth looking at ? https://www.bosch-motorsport-shop.com.au/627cc-min-ev14-injector [ATTACH] Sent from my...
Don’t some of the injectors have angled spray patterns to one side so they could be directed better towards the intake valves? Maybe that could...
That’s exactly the though I’m having to find a set of flexible hoses that go to the injectors, I’m sure they can be made to look ok, seems a...
Just had a look again at my manifold and the injectors seem slightly inclined, may be more difficult to get a rail to fit ? [ATTACH] Sent from...
