© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I just had issues with my lighter shorting out and I might shed some light on your situation. I have a 328 GTS and the stock lighter looked like...
Is replacing the rear main seal something that can easily be done along with replacing the clutch or is it a more labor intensive procedure? In...
I wouldn't be looking for 700hp, but another 100 would be really nice. So you'd need the car to install it which is fine. Have you done any 328's?...
I also went with a QA1 setup in my 328. I went with 300lb springs in front and 250 in the back, lowered it an inch and corner balanced it, and...
With respect to your turbo charger, that looks very impressive. Is this an available kit or something you designed and installed? I drove an 86...
Continuing the never ending story, I found a cigarette lighter socket which had a part number 70000627 on eBay, which looked like mine, and the...
P.S. For those of you that read this thread and need to get a replacement lighter, that part I mentioned from Maranello Classic is a superseded...
Steve, you are The Man. I had been looking at the diagram for figure 6, which showed the AI 61 note, and a wire going to nowhere. The figure 7...
Thanks for your replies. The fuse is fine, it was blown after I'd used the cigarette lighter socket to run an electric air pump to inflate a flat...
In addition, right now with that black wire disconnected, my hazards do not work. And my directionals do not work. BUT - if I depress the hazard...
Does anyone have a wiring diagram for the wires that come out of the hazard switch. I'm particularly interested in the center black wire that...
Thank you for this excellent post and link!
Try again making sure the steering wheel turns a bit. It may be jammed against the steering wheel lock.
Were they 308 or 328's? If so, how did you deal with the rear carpet behind the seats, knowing that that rear parcel shelf is pretty hard to...
I had them installed by a shop that does car interiors and leather work. You should also ask if they can/should replace the foam as well, since...
Hi, not sure why Rifledriver is so down on Connelly leather when so many top manufacturers used it for decades. Not sure if ReOriginals is...
Cool.
Did you have any luck getting some of that fabric? If not, I might be able to help you out. Let me know . . .
ReOriginals out of Texas. I had this set done for my 328 . . . [ATTACH]
I just brought my shocks to the place who installed my tires. He was happy to do it and didn’t even charge me …
