© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Gents, can someone explain the operation of the rear suspension on the 96’ 5.2 us car. I noticed leakage coming from the upper mounting plate on...
Is anyone familiar with the testing the ignition power module Bosch 0 227 100 137 is working correctly? The car feels and sounds like it is...
Yes, it has a starter relay but Ferrari did not do or try any troubleshooting which was quite disappointing.
Update: Brought car to Ferrari of Greensboro Foreign Cars Italia), ECU would not communicate with SD1 computer. Was told possible ECU failure...
Yes, tachometer is working.
Thank you for the replies. I found some corrosion on the dreaded WUR (plug connections) much I cleaned and put some dielectric grease on. My...
Immobilizer is turned off prior to code read. I used a Foxwell 680 Pro, it was able to communicate and ran through all the tests with no faults....
Will not be adjusting the mixture valve. I am experiencing some other systems which may be the culprit. air hose that goes from the intake to the...
We have a no spark condition, fuel system is working properly. Any ideas of what would cause no spark? Hooked up multiple styles of OBD2 code...
Yes, fuel pump runs with relay N jumpered.
Thank you for the extensive information and support! I will test more this morning.
Is what you are showing the starter motor relay or is this the fuel pump relay? Nothing on the floor board diagram shows a starter or fuel pump...
The Key position when waiting for all lights on dash (cluster) to go out. There is a check engine light lit before turning key in last position to...
96’ 5.2 US 6spd, starter engages but isn’t cranking. 12.6v battery. Just replaced the key fob battery. Hit fob for 2 beeps and turn key to...
Stefab...where exactly was the connector that loose from the ECU to the engine?
Alden, this is an unnecessary response. You can provide value in many ways on threads like this which you clearly don't understand how to do....
Thank you Steve! This is the type of response that is expected from a group of knowledgeable Ferrari owners. Although, I am not comfortable with...
[ATTACH] What is the purpose of the screw adjustment and what should it be set at? How do you know when it is set correctly?
Still available, I need 1 rear?