© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Indeed, I was surprised as well, but I made several measurements in different situations and everytime the catalysts were about the same heat as...
Some measurements with a laser temperature sensor, when the SLOW DOWN warning appears, showed that the right exhaust header gets much warmer than...
It’s actually randomly on both sides, but a bit more often en bank2. swapping the ECUs did not impact the chance on left or right Bank
Good idea, I just received one yesterday : I will test it on next ride !
the 1449 (and 1445 which is the bank 1 equivalent) code is likely generated because the catalyst is going up in temperature, or maybe if the...
Indeed, the thermocouple's ECU is called "control station" in some parts websites. I guess removing these thermocouple and/or O2 sensors could be...
Quite often while driving from a cold start, I have the "slow mode" going off, linked to a P1449 error, with or without the save mode (4 cylinders...
Eventually I managed to get the brakes working properly, and ther was several problems hiding one's another : When I performed the "electronic"...
Well, the guy who sold me the unit is absolutely positive that he drove the car before taking it apart, and the brakes were working. He sent me...
even the main o-ing looks perfect [ATTACH]
While I am waiting for another MC, I opened the supposed faulty one, but now I’m even more confused : it looks in perfect condition to me......
I just talked to Eric and we now are quite convinced that the problem comes from the MC that does not allow the pressure to go back into the...
Salut Eric, Yes, I can release the pressure from the MC valves, and I confirm that both valves needs to be opened to free the car totally. On...
Your hypothesis would be that the 4 rubber lines failed simultaneously ? I think it would be very unlikely, but thanks for the suggestion. I'll...
I just performed another test : without setting the contact ON, I pushed the brake pedal 5 / 6 times and the calipers got into pressure right...
The fact is that during the bleeding process, just after the swap, the contact never was "ON". Eventually I tried the pedal with contact and...
You mean, pulling the ABS plug ? I haven't tried that, expecting the car to enter in fault, but I'll try that right away. The 2nd hand part was...
I doubt that this would happen suddenly after such an Open/Close operation on the system. I've performed a full bleeding when replacing the disks...
Hi guys, I had a leaking ABS Unit so I swapped with a 2nd hand one, supposedly taken from a car that was damaged in a barn roof collapse, so in...