© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
If you can really get it for under 20K you have alot of financial leeway to take care of mechanical issues, esp. given that you like to work on it...
Thank you, Steve, that was really helpful. Followed your procedure and we're back and business. Yes, the outlet from the reservoir to the clutch...
I'm putting the car ('87) away for the winter, which includes renewing the hydraulic fluid -- four wheels plus the clutch slave cylinder. I've...
Just to close out this thread: I removed the oil filter housing, torqued the oil sender (which was quite loose; no wonder it was leaking), and...
Yes, it is indeed strange. The oil originates along that groove, so it's not the plastic where the wire enters. But one would think that if it's...
I fabricated a kind of wrench out of thin (18 gauge) steel. It was too flimsy to really torque it, but I thought, wrongly it turns out, that just...
I used the copper washer that came with the new sender. No way I'm going to get vice grips on the nut; maybe you mean the unit itself (the...
OK guys, ran the car after cleaning it. Turns out it was obvious: the oil sender, which I recently replaced. (If I had popped the engine lid...
I did alot of cleaning today under the car; I'll start it tomorrow and hopefully I'll locate the leak. I think the grime on the transfer case is...
Thanks again -- I really appreciate the help (from everybody). Yes, I'm leaning towards that tube from the oil vapor separator. Like I said...
So the hose in the diagram that is outlined in red, is that the braided stainless line connecting to the oil cooler?
Thanks for this! Question: if it were the crank seal, and oil were in the clutch housing, wouldn't that affect the clutch operation? The car...
The two transparent tubes are attached to the wheel liner with a 10mm bolt. The oil is dripping down the outside of these, but it's not coming...
My 3.2 has suddenly developed a significant oil leak that I'm having difficulty locating: From the left side of the car, dripping down over the...
One of the previous owners replaced the fuseboard with an oem Ferrari unit. I wish he had gone aftermarket. In any case the fuseboard isn't in...
Update: I did a continuity check between the fuse and terminal J3, which checked out, so the track in the fuseboard is good. Then I checked if...
Those diagrams would be terrific, if it's not too much trouble. The wiring of our cars are basically identical, apart from cab specific circuits....
Thank you for the kind offer, but I believe the diagrams are different. I could be wrong, however.
Hello everybody, Wondering if anyone has any suggestions (or experience) with a persistent problem: my headlights are stuck on the "parking...
You're not kidding -- that stuff is crazy expensive when you have a 5 meter minimum length ($370). And it's the same size (19mm) as the stuff on...