© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
these are push on starlock washers. First, put a polyethylene washer on the stud and then get a kit if you can't find them at the local...
Dominick graciously helped my friend you tuber (Ferrarifxs) who is not on Fchat and took a cold call about a 355 manual F1 operational system....
If you can get the actual rearview mirror opened and apart, there is a 4 pin plug with a green, black and red wire to the motherboard. Inside the...
Yes available at Ricambi. Measures for placement exactly as noted. Adhesive tape on back. Yes since it is the last Pininfarina designed Ferrari.
I applied but never heard a thing.
Usually a copper crush washer is interposed between the mating surfaces of the plug and the boss. I think the plug you show is actually cadmium...
My 458 came with all black emblems. They are simply lacquer coated silver ones from the factory. Take them off and soak them in lacquer thinner...
Antigravity battery company has just come out with their version of a newer style battery maintainer for their batteries FWIW Looks to be the...
Has the brake recall been done on it? There was a period of time that the brake reservoir cap was not ventilating properly and starving the...
looks like you got most all of it out, Probably can fill with distilled water and run it a bit then drain it all out and put if what your using. A...
In my experience a bidirectional code reader is something like a ThinkDiag or Leonardo code reader that can issue individual commands to operate...
See if you can open it with a bi directional code reader. Try pushing down of the frunk lid while activating it with your key. maybe something is...
I monitored an Antigravity battery with a Bluetooth monitor in the 458 for about a week for sitting voltage drop. It averaged out to -0.07V...
As I stated above, "after bleeding and checking booster".... What we don't know is the maintence history, pad history, tracking details etc. It...
Seems there is minimal hydraulic pressure developed by the master cylinder. If booster is ok, and nothing changes after a bleed, I'd replace the...
Did anything work for you for this problem?
No expert here but the LED's are controlled by a special ECU in the steering wheel called the NVO board that is programmed for the LED's. It...
Have you tried disconnecting the battery for awhile and doing a reset? Thgat sometimes cures a few problems, essentially rebooting the car. Just a...
