© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks Armen - that's exactly what I was looking for. Final question - it looks like you have spacers -are they 25mm? Jimbo
Double Thanks! According to the tire data, the difference in tread width between 255 and 275 is 7/10 inch, a little less than 3/8" per side. It...
I'm due for new tires in the spring. Thinking of replacing the Pirelli Assimetricos with Goodyear Eagle F1 GS-D3's. Has anyone fitted 275 rears...
After doing the Easy-Off/Plasti-Dip process to all my interior pieces (dash vents, console, door handles etc...) two years and 3500 miles ago, it...
It's Exit 2 in Mass., and I think it's Lenox/Lee. (or Lee/Lenox?- I must have exited there 100's of times in my life, and I can't remember the...
According to the Alfa Owners BB, ticket sales that include the Italian Car Corral ended on Aug 24. If you email the organizer, ask him if we can...
I'm not sure if it's quicker, but I've been using Exit 2 - Lenox, to Rt. 102 S to Rt. 7 S to get to LRP for 30+ years.
I'll be heading there Mon. in my 348 from Western MA. Which route are you planning on taking? Who's putting together the Italian Car Corral?
It would seem to me that some of the ground effect on the 355 is seriously disrupted by the hole in the undertray at the engine sump. IMHO,...
Count me in for a pair. I refinished mine using the Easy-Off/ PlastiDip method a year and a half ago, but they could use a re-do. Black...
Just read this thread since I spent yesterday doing an oil change and then a 180 mile drive on what could be the last over-60...
For years I've used the Intercomp 0-60 psi 2" analog gauge and would highly recommend it. For $29.95 it has accuracy within 1.5% across the range....
The stock 30A fuseholder under the trunk liner for the 348 AC unit (yep, the one that melts) has Ford stamped on it. The reason it melts is not...
It's a 22mm O2 socket - Autozone, Advance, etc . . .
I use Meguiar's Back to Black. It gives the lower panels a satin sheen, and is easy to apply. Long-lasting to boot.
I was able to get at mine by partially removing the coaming weatherstrip, ventilation trim ring, and a few screws around the top of the fender...
I remember reading somewhere here that the speedo sensor produces a square wave?? Anyone know if it is a basic Hall Effect-type sensor?
Differential chatter??
Yup. Top was sanded, filled, faired, and sprayed in Glasurit by a very reputable local shop in October of '05. Grain started popping back out in...