© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
All flanges needed be cut, two of them needed angle adjustment, the other two extensions and angle adjustments. Make a mockup, design and buy SS...
Larini exhaust showed up not fitting and twisted, we had to cut off and re-weld all the pipes from the system to OEM manifolds. I will NEVER buy...
I have no idea, my memory told me it was under the car somewhere below the alternator. Maybe it was something with the Euro to US conversion or...
The ignition switch was the problem, opened and cleaned and lights came back and it fired up right away! I have one last item I need to install,...
I was going to ask about the ignition switch, had some of the same problems recently and it all came down to the ignition switch. Only had 4...
Yes, it may be a longshot but it would be interesting to put a temp measuring device (that can record history) in there and see what degrees it...
Short summary in case someone experience similar problems. First off check all the usual problem areas that Steve pointed out. I had already...
The switch was the problem! Took it apart, cleaned slightly with contact spray. Two black cables were cut and disconnected and I left them like...
The photo is pin 13, it is the one coming from the ignition switch, 3.88 volt does not seem fair :)
Hello Steve, Thanks for chiming in! All terminals, connectors and fuses are brushed or cleaned, will check voltage at sensors when I have a...
Seems like I had a pdf of the 85/85 F113A workshop manual. It is the best diagram I have so far. Its a start! [ATTACH] [ATTACH]
Hello, I find a lot of info on US cars but not on early cars, does anyone have a link or info to diagram or description of the ignition system on...
Test sensors; both measure approx 685 Ohm resistance. Tachometer relay; jumper 30-87 and pumps rubbing but no dash lamps. No start though, fuel...
I took out the Tach relay today, it may be in need of replacement. Before I took it out the dash lamps were on/working as they should but no...
It's been a busy month, little time to look at the no spark situation. I will try to be systematic and started with the connectors under the...
I have to agree, I ordered a system November 2021 and received the exhaust June 2022, was promised 8 weeks production bit it took more than 6...
Very interesting to hear and read about first hand experiences, this seem to be a "disaster waiting to happen". I briefly googled the timeline...
Yes, maybe this was the first encounter with the dreaded "rubber deterioration" syndrome that has been discussed but personally up to now never...
I am lucky to have a 5 gallon ultrasound cleaner from a project that stranded and I put the carbs in there, with organic detergent the carbs...
That's a sweet little car, interesting that you brought this up since I recently had the same problem in my serie 1 E-type. The jets were clogged...