© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I'll take that as confirmation and test it. Thank you for looking that up.
I've had the car for about 3 years and I don't think its ever been working. It always takes a number of cranks to get it started when cold. But...
I'm investigating why there is no power to the CSI or TTS on my 1984 308 QV USA. One item I discovered and want to eliminate as a possible reason...
Thanks John, It does seem to point to a cap/rotor issue. I have checked that there is resistance present on the #4 wire when installed so I...
Hi all, 1984 308 QV US: I had a leaking distributor o ring on the end of my front cam shaft, and I decided “while I was in there”….. I took out...
Hopefully you guys will indulge one more inquiry on this from me. When the car came into my possession, the electrovalve and diff pressure switch...
Thank you all for the input and direction on this. Appreciate it.
@Rifledriver, sorry if I'm being dense, but I assume you mean since no air to the CAT in '84, removing the CAT and putting in a test pipe has no...
Lots of interesting info here since my original post. On my 84 QV, I'm past the time (for better or worse) to reevaluate whether to remove the...
Hello and Happy 4th, Hoping to get some more info on this topic in this thread as it looks like a few of you have do this by now. Otherwise...
Rifledriver ; I should have included in your quote that I referenced the part about your opinion on the source!.... I know many of us feel the same.
Thank you s219. After more research on FC, I found Rifledrivers advice (below) per his post last year on these pumps, and I purchased his...
Hello, For a 1984 308 QV US....The Ferrari part number is 120098. Anyone know the cross referenced BOSCH part number? Thank you! [ATTACH]
Thanks waymar, true that it could still be the seal, the ones I used were not ribbed. Did you use seals with a metal casing or the all rubber...
Hi all, I had oil leaks in my 84 US QV from both distributors and replaced the seals in each. The front bank still leaks so I'm assuming o-ring...
Question for this old thread- I’ve already replaced the seals on my 84 QV but the front distrib is still leaking oil. So want to do change the...
