© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Just use a flat thin chisel and hammer the 3 sides between the gap then the cover will come off. [ATTACH] Once it comes off, just remove the...
Just an update, I have sent back the NVO board I bought from Aliexpress for fund along with the factory original (faulty) to the seller. He...
Yes, even when the car is off. All doors locked. I even check after a couple of days but the start/stop button, signal, suspension switch are...
Finally got the NVO board from Ali Express, the swap is pretty straight forward thanks to the guides here :) Just a question, does your button...
Thanks cudaman, will look into the battery over the weekend first. Yes my OBD did not pickup any codes. Will post an update later.
Similar thing happened to me yesterday. I was wondering is that the problem? (uploaded video) I got the "Electrical System Failure Go to Dealer"...
thanks for the info!
I doubt im near anyone as im in Asia. What diagnostic tools you need? I read OBD cannot reset this warning light as its on a separate module....
Long story short...i accidentally started the car with one of the suspension connector plug removed. Now the car will throw a suspension failure...
What type of pulley will I need? would be appreciated if you could share your experience. thx
I am about to replace my rear hub carriers too, bearing were making noises. How did yours go? I am a DIYer garage person, and I wonder do I need...
I cut the foam seal carefully and did not destroy it, it pretty much just sticks itself back without any glue. I suppose u can get the foam...
Last year I have the exact same problem, motor spinning but window not moving up/down. I took out the motor and found out the gear has split....
Where was the 1-2 that they were talking about? I remember before the start of they Ferrari said undercut or overcut they will get Russell no...
458 axle hub nut size = 41mm. Sent from my iPhone using FerrariChat
Just came across this document and would like to share it here, it's the procedure for changing the brake caliper dust boot (not for the seal...
Thanks up4speed for the write up. I started a topic a while back (458 Exhaust bracket)...
Com’on…even the Soft is like the Hard in Canada cant be degrading that fast with just less than 10 laps to go… The have the time to double stack...
Anyone know the wrench socket size for the 458 hub nut for the axle? On the 430 it is a 36mm, i wonder if it is the same for the 458? Many...
Just quoted by my ferrari dealer that there was a split in one of the bush which looks like this as they quoted with the part no.:...
