© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
WD40 is not a penetrating fluid. It displaces water.
Welded. Strange that those welds would fail. Maybe the welder just did not finish after tacking the brackets to position them? A Friday late after...
The plastic vents have studs on them that push into metal retaining clips. Even if you were replacing the oem plastic vents the dash must be...
Nothing exotic about those at all. Simple wire loom clamps available every where in all sorts of sizes.
Never ever go back to that dealer. As someone suggested, sounds like they do not want to work on it and gave you silly high quote to run you off....
I will be pulling the dash and repairing the loose leather myself as mine does not look stretched and do not see why it will not glue right back...
Just saw pins on Ebay for $10 made by Pocher offered by Scale Details. I bought a couple of these years ago for my keys. I bead blasted the key...
Could not agree with 2NA more! I just replaced my front lower ball joints with the Hill SS units but I knew my lowers were bad. Thumping noise...
Say no more. I am now convinced. Appreciate the help guys.
Jack, I thought past my initial first question of difficulty removing the cam after realizing the room gained with the cam covers off. Your...
Pheww. Not a single straight answer to the question but I sure got several answers. I am a believer of cam timing and know how to use a torque...
Not considering puling motor. I guess you are saying it is not hard to do with the motor in. Just looks like working under the upper frame rails...
I know many of you have done this. How difficult is it to pull the cams with the engine in the car? Seems like it would be tough to torque the cam...
How difficult is it to pull the cam covers and cams with the engine in the car? Seems like it would be difficult to get to the nuts on the cam...
Agree with Vrsurgeon. Do not fix what is not broken just like you should walk past a sleeping snake.
Oops/ [ATTACH]
IMG_0270.jpg The 4 screws are 5mm x 12mm x .08 and nothing is in the large threaded hole. Plate is alluminum and the screw holes are counter...
SemiChrome is the German polish.
Learn something every day. Looks like you guys were right about the auto industry using just crimped connections. Lot of discussion about both...
This type failure is not just a Ferrari thing. Had the same problem on my Motor Home inverter cable at the 300 Amp fuse block. Simple fix, cut...