© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi all Thanks everyone for your help and suggestions. New coils and ignition modules all round have done the trick. Matt
Thanks both M.Stojanvic I’ll take a look at the ECUs when I get back. Does the car still have exhaust ECUs on non cat? Aeroflop - thanks for the...
Hi m.stojanovic thanks for sharing your experience yes, the symptoms are #2 - loss of power under load only. I’ve just ordered coils and...
Given the low cost of them, I’ve ordered a pair of coils and ignition modules ready for my return
I guess this also means I don’t have the SDL lights, just check engine which doesn’t illuminate
Thanks everyone already I should have mentioned it’s a 1991 UK non cat The coil pack was my first thought. Any suggestions on how to test them...
Hi everyone I took my 348 out a few days ago after winter storage due to a request from a friend. Their young son sadly passed away last week,...
passenger side switch operation is good up and down - fast movement From drivers side switch: Down is fine but no up 2 earths to back of switch...
Amazing work both! I don’t suppose you’ve posted your model anywhere Udo?
Hi all After fixing the severed wiring on the drivers door loom, almost everything is working again! One gremlin still exists that I can’t get...
Hey all Any tips on what to look at? Tried swapping switches but same issue Sent from my iPhone using FerrariChat
I didn’t want to pay a lot for something I don’t intend to use! £14 on eBay and fits great on my 348 GENUINE RENAULT SCENIC 2005 TOWING EYE HOOK...
Thanks both [emoji106] I also spotted on the parts diagram that they are meant to be 6 hex head bolts. I’ve seen photos of someone else’s clutch...
Hi all Currently reassembling dual plate clutch and I’m struggling to get 2 bolts to engage The bolting of the clutch to the flywheel is via 4...
Thanks for the link to your thread Ferrarium. Perfect, and excited for future engine out project! Sorry to read about your pulley failure and...
Agreed Pepsi10 - thanks everyone for chipping into the thread to share tips and experiences I’ll post a video to show them lifting a 348 as soon...
That looks so much more convenient than messing with axle stands etc. Look like they are going to be worth the investment. Thanks for sharing Mike
Thanks Mike. Transverse is a good option. I’ve enough confidence to take the plunge and order one! thanks all
Good spot Qavion - I read the manual and the point about they cannot exert sufficient force until a suitable height is reached. I didn’t connect...
Qavion & Mike - do either of you use with 348? Lanab - makes sense that it may feel unstable with the weight of v8 hanging off back. I suspect...
