© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Just sharing a replacement roof side tension cable I made for my spider to help others in the future. Symptoms are that with the roof up the...
Many thanks for the comments and feedback. I used a local company who offer similar services to crashdata to change the op-amps and they spent a...
Hi, I thought people might be interested in an alternative HVAC that I developed for my 355 Spider and the journey I went on to get here. Sorry...
Thanks 953736 does seem to be the one and I also can't find anyone that stocks it. I'll just have to modify a right-angled pin PCB one.
Does anyone know the name/spec of the yellow connector? So far I know it as an Amp automotive 26W MQS connector and I'm trying to find a socket...
Thanks all! Thanks for the offer, but I'm in the UK so shipping would be a challenge, and I'm planning to do this over winter when the car will...
Hi, I need to remove the dashboard at some stage to get it reupholstered as the previous owner left it in the sun too much and the leather has...
Thanks. I'm also in the UK, but don't recognise the name. Do you have some contact details?
Hi, Does anyone have any experience of removing the fuel sender unit from the tank? Mine continually under reads or gets stuck, which is usually...
Thanks. I've ordered a conformal coating remover pen and will give that a go on a safe area before trying around the chips. Unfortunately I'm...
Hi, I'm going to attempt to replace the op amps on mine, but does anyone have any suggestions on how to remove the hard plastic like film which...
Hi, Has anyone found any alternative motors for this issue or suggested part numbers? It seems the ones fitted to Saabs are getting as rare as...
Thanks Ian. A few things I'll look at next weekend. The secondary cylinders are definitely not working, which I believe is owing to the solenoid...
Hi all, There are many threads covering the spider roof, but this one seems the most appropriate for my issue. I'm trying to get the roof...
I've managed to sort the issue by spending a few hours making a new Pawl. You can remove the old one by drilling the rivet out and as you can...
There is a spring on the Pawl, which I'm thinking I could try and increase the tension to see if that will help. I'm also looking around for some...
Unfortunately, although Superformance were unable to confirm that the part was compatible with a 355, they also they said that they no longer...
Many thanks Ian. I've just emailed Superformance to see if its compatible....It certainly looks the same. If it is, I may have a go at...
Hi. I've read that the F355 handbrake could be a bit suspect even when new, but I'm struggling to get mine to stay on. Most the time the ratchet...
Couple of other things whilst I remember. Removing the oil seals which are fitted inside the camshaft caps isn't easy. I was hoping they'd just...