© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
A great move. Just watch Hamilton stick it to Verstappen once back in a competitive car, which the 2025 Ferarri will be. Lewis is such an exciting...
I wouldn't have bothered in that case! The cheapest I could see was £150 when I did the rebuild. But I'll be honest, it was a fun mini-project : )
https://www.ferrarichat.com/forum/threads/how-to-assemble-ferrari-mondial-qv-electric-mirror-switch.648587/ MIne exploded when I first removed...
After the frustration of randomly prodding the buttons while stationary at traffic lights I sat down and worked out how the digital clock works. I...
1984 Mondial QV Rosso Manchester, UK Instagram @today_im_driving
This is very interesting, thanks. I didn't think to look up retro 16 inch tyres and only researched moderns. Personally I'm happy enough with the...
The picture is accurate. I sgree, and I'm not completely happy with the front tyres. The 205 width is a little overstretched on the 8J rims. Once...
Here are the Pirelli P7 tyres mounted on the 16 inch Superformance rims. I was in a rush so left off the centre caps for now. I'm mostly happy...
I certainly will : ) I ordered them from from camskill (www.camskill.co.uk)
Thanks for that, afterburner, did not realise that. I will look into it.
I've got a set of four 8x16 inch Superformance rims and have ordered some Pirelli P7 tyres that should arrive tomorrow. I went for 205/55/16 front...
My QV was missing one of the black plastic seat belt anchor covers. I couldn't find an exact replacement anywhere but VW part number SKU:...
So, as I said, this job took ages, but I got there in the end and learned much along the way. When the time comes to replace the clutch this will...
[ATTACH]
A final issue was, on reassembling and refilling the gear oil for a second time, the car had no drive. By this I mean that upon starting the...
Another issue was that the large O ring slipped during first refitting the bell housing to the block. This was despite double checking when the...
Here are a few notes that might help others. First, it was really difficult to remove the bearing on the driveshaft. The helidoctor's bent wire...
Thanks to everyone who commented on this thread. The job took AGES but is now done. The oil leak is no more and the culprit looks to have been the...