© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
If there's a tendancy to pop at low speeds when waffling about it might point to a weak mixture.
Or you can source all sorts of 308 parts from Eddie Walsh. http://www.ferrarispares.co.uk/308_gtb_gts.html
Jeff Yes that sounds OK. Bear in mind the main purpose of primer is to act as a surface filler, so only apply enough to get a smooth,flat...
Jeff, If you wish to refinish the wheel that's perfectly OK. All of the products you've used are compatible so there will be no paint...
Jeff, If I may let's start with some basics.The primer coat is the thickest and the colour coat the thinnest in terms of build up. All your...
For what it's worth I painted my wheels last year - Argento on a silver car, and used I assume, the same as you - clear over base MaxMayer from...
Gianluca Here are some images of the doorskin and work so far. The skins cover the bottom 8" or so, and were made to a drawing I supplied my...
Spot on Mark, just cleared away the grease and I can see a circlip on top of the pin. Now I've just got to find a way of threading all the old...
Paul I was hoping you'd say that. But the vertical clearance needed on the top pin suggests there's going to be a foul with the door flange...
I'm putting lower door skins on my 308 and have got to the stage where I need to remove the doors to seal the flange and detail the returns. Which...
In 2004 the washing machine accidentally hit 1800 rpm when I forgot to load anything and it overreved, and just last week 12000 rpm with the...
There are a bundle of things to do on the old nail. I tried - unsuccessfully - to weld in metal into the doors last year, but bubbles in new...
Its always delightful to read pleasant comments on the XJR. I was lucky enough to be the guy heading up the design team, and I was always...
Thought some of you might be interested in a pedal car I've been working on over the past couple of months. I originally got it off ebay (its...
Could be heat sink related. With no airflow the distributors ( and fuel lines) will slowly cook when you shut off a warm engine.
I'll say straight away I'm no expert on Ferraris or brakes but I had something similar on my 308, and like you did the pads and skimmed the discs...
That's a good call John. I've had a look at the caliper and it seems to be OK. From previous records the caliper was rebuilt by a previous owner...
Thanks for the advice. Is the solenoid removed in - situ or do you have to take the starter out as well? An idiots guide to removing the solenoid...
Took the car out yesterday - and yes I do have a snatching caliper. The osf wheel was was way too hot so I'll be rebuilding the calipers this...