© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Right, I’m asking what the factory did. The parts diagram shows an adhesive patch so guessing that’s what it was originally.
Hey guys do we know what the factory did to attach the rear view to the windshield in a 1986 328? Mine got knocked by a passenger and fell off...
Amen to that. His words to me are pretty hollow and meaningless as long as they continue to give the guy a platform by having the video up on...
Sorry for the delay been meaning to update this thread for a while. I sorted this out a while ago now but haven’t been on to update with the...
Maybe strip the threads or seize the bearing up? There should be zero play in this type of bearing correct? None of the other wheels have any play.
Grasping at straws here- is it possible the nut is too tight?
Used a press to press the bearing onto the spindle. Stopped when there was contact. And made sure the stub axle went into the notch as well. I’m...
I’ll compare the two side by side more closely when I get a chance to disassemble the bearing. But I don’t have the capabilities to measure every...
That’s a great question. Maybe someone else can chime in.
Close up of the bearing. If I tear the assembly apart and find any sort of damage I’ll post it....
Lug bolts were at 72 ft lbs. Disc was moving as far as I could tell. Made the same noise with the wheel off and wiggling the disc. Made a video of...
I’ve got another problem besides that now. Brand new bearing and everything torqued to spec. Now this-...
Here’s another question- it seems like most are applying medium strength thread locker to the 6 bolts securing the bearing assembly to the...
Okay so I’ve learned a few new things. One is that with these Superformance bearings you can actually snap the seal back on. It’s a different seal...
Okay great I hoped it would be okay to do it that way too. Thank you for confirming! It seemed like what happened is the two races separated some...
Rifledriver is there any reason I couldn’t press the hub down into the bearing rather than pressing the bearing onto the hub? Basically doing it...
Thanks for sending, I've read every 328 bearing thread I can find on here the last month. Contacted Superformance and they have not received any...
There are no markings on the bearing I have here, but the Superformance page shows it as the SNR bearing. [ATTACH]
So it looks like the seal on the Superformance bearing is just not nearly as well seated as the original bearing. And it detaches when installing...
Good to know because every single photo you see of people doing this job shows the bearing completely filled with grease. I’ll go easier. Thanks...
