© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Jonny, are these the part numbers you used posted above? I was wondering if there was any leakage or problems keeping them in place. The green...
I actually got these part numbers and info from past post on this site under the search for "Fuel Injectors". If they do not work I would like to...
Decided to replace my injectors since I was upgrading the fuel system. I was searching through past threads on the parts required for the 2V 80-82...
Pulled the metering block, piston was stuck in open position. Called Larry and he said to send it to him for a rebuild and calibration, so off it...
Thanks Steve for the reply! Did as you said cracked the cold start injector...lots of pressure there. Went to restart the car and the same thing...
I went out to work on the car again, like I said with the key in position ll the pump runs unless the metering plate is up. Also I have found if...
This morning I went out and unplugged the blue connector on the top of the fuel metering block, the pump stayed running. Plugged the blue...
It is plugged in I checked that first. However I have not checked for power on that lead.
I guess no one has an answer. So today I went out to figure out the problem on my own. Turned the key on and without starting the engine the fuel...
I have a 82 308 gtbi Euro, it has been garaged for awhile while I went through Leukemia treatment. Now I am ready to enjoy driving her again. The...
Thanks for the info, makes sense to me. I will put it back together as side inlet, center outlet.
I looked at another pic in past posts on a QV model and it showed it on the outside as well. Now with the pic Steve has shown not sure which one...
I have a 82 308 gtbi, ordered a new Bosch pump and accumulator a couple months ago and putting everything back together. I also took it completely...
I agree +1 for Euro..(82 Euro 308 gtbi) no problem here getting mine insured for full value, no problem getting parts, did my own belts and...
I had mine replaced at a local upholster. I had wear on the drivers side piping. He replaced it and you can not tell.
Why that be a grounding strap for the rear lid.........
I built this same exhaust several years ago and have it on my 308gtbi. I posted pics of it. I used a Magnaflow-cross flow muffler similar to the...
I found this posting on ebay...check out the rear bumper...there is none! Is this a hack job?...
I like the BBS wheels(the mesh style) Have had them in the past on some BMW's. I prefer 5 spoke wheels better on the 308.
I decided to keep my 16" QV wheels, thanks for the input..I changed my mind on my own..really do not care what you like as a whole. Just wanted to...