© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Rick- What kind of tools did you use to stamp the peen? I think the sump housings are die cast aluminum, which would lead me to conclude that...
Hi Mark- I decided to use the OEM seals based upon various posts such as the following:...
I am in the process of replacing the shift shaft seals. I got the old ones out fairly easy. It's now time to install the new ones. I attempted...
1.) 1987 69599 2.) GTS 3.) Black/Black 4.) Clifton Park NY 5.) Kevin J. Moore 6.)February 1987
I had some time to think about the matter and came up with the following. The eye-bolt Should probably be 1/4 x 6". The washer(s) should be at...
Hi Ken- I haven't tried a sharp pick yet, however I have tried using a long screw driver as a means to see if the tube extension will at least...
I am in the process of replacing the shift shaft seals on my 328. Or at least headed in that general direction.... Like so many others before me I...
I am in the process of replacing the shift shaft seals on my 328. Or at least headed in that direction.... Like so many others before me I have...
Can't seem to get the inner liner to pop out of my rear fender. Have removed all fasteners, however the liner seems to be held in place by a...
I'm trying to take the rear fender liner (Wheel-House) out of my 328. I have taken all of the fasteners out however the liner won't came out. It...
Bump
Same issue as noted above. Does anyone have a suggestion/fix? Techmogul: Did you find a solution? Kevin Saratoga NY 87-238GTS
I've noticed that most 512 BB*'s on E-Bay are not meeting their reserves. NADA puts average retail at about $53k and high retail at $78.4k....
For those of you who have changed aspect ratio's on your 328's (205/55 --> 225/50 & 225/50 -->245/45) have you noticed any issues with...